{"product_id":"gen3-marine-6-lb-beach-spike-anchor-18-in-angled-iron-spike-with-padded-slide-hammer-handle-and-dual-d-rings-mpn-5-4022","title":"Gen3 Marine 6 lb Beach Spike Anchor, 18 Inch Angled Iron Spike, 32 Inch Total Length","description":"\u003cp\u003eThe Gen3 Marine Shore Spike Anchor is a 6 lb beach anchor built for securing small boats, kayaks, canoes, and other watercraft on shore or in shallow water. Instead of digging into sand or mud like a traditional fluke anchor, it uses an 18 inch angled iron spike that is driven directly into soft or hard-packed shorelines. The top of the anchor forms a padded handle that doubles as a built-in slide hammer, so you can drive the spike into the ground by hand without extra tools. Once the spike is set, the anchor holds firm thanks to its angled iron design, which resists being pulled straight back out.\u003c\/p\u003e\u003cp\u003eThe anchor has two D-rings for different jobs: the lower D-ring is used to tie off your vessel's anchor line, while the upper D-ring lets you attach a buoy and line for visibility on the water. At 32 inches in total length, the Shore Spike Anchor is compact enough to store and transport easily, and it comes with a storage bag for keeping it organized between trips. This anchor is suited to anyone beaching or shallow-anchoring a boat, kayak, canoe, or personal watercraft who wants a simple, hammer-in alternative to a conventional anchor and rode.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gen3 Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5-4022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Shore Spike Anchor 6 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpike Length:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 6 lb Beach Anchor, Storage Bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 810037463507\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Shallow Water Anchors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Gen3 Marine Shore Spike Anchor used for?\u003c\/strong\u003e It is a 6 lb beach anchor (Gen3 Marine part number 5-4022) designed to secure a boat, kayak, canoe, or other watercraft on shore or in shallow water by driving an angled iron spike into the ground rather than burying a fluke.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the spike on this anchor?\u003c\/strong\u003e The spike on the Shore Spike Anchor 6 lb. Is 18 inches long and angled for holding power when driven into soft or hard-packed shorelines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the total length of the anchor?\u003c\/strong\u003e The Gen3 Marine Shore Spike Anchor measures 32 inches in total length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the anchor itself weigh?\u003c\/strong\u003e The anchor is sold as a 6 lb model, part number 5-4022, with a total shipped weight of 7.2 pounds including the included storage bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you install or set the Shore Spike Anchor?\u003c\/strong\u003e Use the padded handle at the top of the anchor as a built-in slide hammer to drive the 18 inch iron spike straight into the shoreline until it is firmly seated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the two D-rings on the anchor for?\u003c\/strong\u003e The lower D-ring on the 5-4022 Shore Spike Anchor is used to tie off your vessel's anchor line, while the upper D-ring is for attaching a buoy and line for visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this anchor be used in water as well as on shore?\u003c\/strong\u003e Yes, the Gen3 Marine Shore Spike Anchor is suitable for use both on shore and in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Shore Spike Anchor made from?\u003c\/strong\u003e The Shore Spike Anchor 6 lb. (part number 5-4022) is made from iron and finished in silver\/black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you purchase this anchor?\u003c\/strong\u003e Purchasing the Gen3 Marine 5-4022 gets you the 6 lb beach anchor itself and a matching storage bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this anchor a good fit for kayaks and small boats?\u003c\/strong\u003e The compact 32 inch overall length and 6 lb weight of the Shore Spike Anchor make it a practical size for kayaks, canoes, and other small watercraft that need to beach or shallow-anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a spike anchor different from a traditional fluke anchor?\u003c\/strong\u003e Rather than relying on flukes digging into a seabed like a traditional anchor, the Gen3 Marine Shore Spike Anchor is hammered directly into the shoreline using its 18 inch angled iron spike and padded slide-hammer handle.\u003c\/p\u003e","brand":"Gen3 Marine","offers":[{"title":"Default Title","offer_id":48991679250651,"sku":"GEN-5-4022","price":36.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__72346.1754921888.500.750.jpg?v=1785164324","url":"https:\/\/www.goodvibesmarina.com\/products\/gen3-marine-6-lb-beach-spike-anchor-18-in-angled-iron-spike-with-padded-slide-hammer-handle-and-dual-d-rings-mpn-5-4022","provider":"Good Vibes Marina","version":"1.0","type":"link"}