{"product_id":"interlux-bilgekote-white-quart-durable-oil-based-bilge-locker-and-bulkhead-paint-5509652","title":"Interlux Bilgekote White Quart - Durable Oil-Based Bilge, Locker and Bulkhead Paint (5509652)","description":"\u003cp\u003eBilgekote White is a tough, oil-based marine finish built for the hardest-working spaces on your boat. Formulated to withstand oils, chemicals, knocks and scrapes, it delivers a durable gloss coating that keeps bilges, lockers and bulkheads clean, bright and easy to maintain. The high-gloss white surface reflects light to brighten dark compartments and makes spotting leaks or debris far easier.\u003c\/p\u003e\u003cp\u003eChip resistant and waterproof, Bilgekote goes on as a liquid and cures to a hard, wipeable finish that stands up to years of service below deck. Two coats provide a highly durable, protective barrier that is equally effective in storage lockers and on interior bulkheads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Interlux\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 5509652\u003c\/li\u003e\n\u003cli\u003eColor: White (gloss)\u003c\/li\u003e\n\u003cli\u003eFinish type: Gloss\u003c\/li\u003e\n\u003cli\u003ePaint type: Oil-based\u003c\/li\u003e\n\u003cli\u003eItem form: Liquid\u003c\/li\u003e\n\u003cli\u003eSize: 1 Quart\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 10.36 square meters per liter\u003c\/li\u003e\n\u003cli\u003eChip resistant and waterproof\u003c\/li\u003e\n\u003cli\u003eIndoor use, wood and fiberglass surfaces\u003c\/li\u003e\n\u003cli\u003eWeight: 2.9 lb\u003c\/li\u003e\n\u003cli\u003eUPC: 081948408646\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove all oil and grease from the bilges before painting.\u003c\/li\u003e\n\u003cli\u003eSand with 220-grit sandpaper; if the surface is in poor condition, sand with 80-grit.\u003c\/li\u003e\n\u003cli\u003eIf previously painted, remove all old, flaky paint and ensure the area is completely dry.\u003c\/li\u003e\n\u003cli\u003eClean thoroughly with an appropriate solvent wash, surface prep or thinner before coating.\u003c\/li\u003e\n\u003cli\u003eApply two coats for a highly durable finish. Never apply direct from the can to avoid introducing contamination.\u003c\/li\u003e\n\u003cli\u003eUse top quality fine line masking tape for crisp, clean lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Bilgekote White used for?\u003c\/strong\u003e Bilgekote White is a durable oil-based marine paint designed for boat bilges, lockers and bulkheads. It provides a hard, protective gloss finish that withstands oils, chemicals, knocks and scrapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish is this paint?\u003c\/strong\u003e This is a white paint with a gloss finish. The bright white color reflects light to brighten dark compartments and makes leaks or debris easy to spot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I apply?\u003c\/strong\u003e Apply two coats for the best durability. Never apply directly from the can, as this can introduce contamination into the finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I prepare the surface before painting?\u003c\/strong\u003e Remove all oil and grease first, then sand with 220-grit sandpaper. If the surface is in poor condition, sand with 80-grit. Clean thoroughly with a suitable solvent wash, surface prep or thinner, and make sure the area is completely dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if the bilges have been painted before?\u003c\/strong\u003e Remove all old, flaky paint and ensure the area to be painted is completely dry before applying new coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Bilgekote waterproof?\u003c\/strong\u003e Yes. It is waterproof and chip resistant, curing to a hard, wipeable finish that stands up to the demanding conditions found in bilges and lockers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this container?\u003c\/strong\u003e This is a 1 quart can of paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does a quart cover?\u003c\/strong\u003e Coverage is approximately 10.36 square meters per liter, depending on surface porosity and application method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used on both wood and fiberglass?\u003c\/strong\u003e Yes. It is suitable for wood and fiberglass surfaces. When painting fiberglass, evaluate whether any anti-osmosis treatment is needed before coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it resistant to chemicals and oils?\u003c\/strong\u003e Yes. Bilgekote is formulated to withstand oils and chemicals as well as knocks and scrapes, making it well suited to bilges and storage lockers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of masking tape should I use?\u003c\/strong\u003e Always use top quality fine line masking tape to ensure good, crisp paint lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this paint for indoor or outdoor boat areas?\u003c\/strong\u003e It is intended for interior boat spaces such as bilges, lockers and bulkheads, all located above the waterline.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"Default Title","offer_id":48991679938779,"sku":"ILX-YMA102","price":42.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51zd3SLIGUL_1169413e-af7a-42ae-bda3-616910cec854.jpg?v=1784509767","url":"https:\/\/www.goodvibesmarina.com\/products\/interlux-bilgekote-white-quart-durable-oil-based-bilge-locker-and-bulkhead-paint-5509652","provider":"Good Vibes Marina","version":"1.0","type":"link"}