{"product_id":"jabsco-8-blade-nitrile-impeller-14750-0003-p-for-marine-water-pumps-and-bilge-pumps","title":"Jabsco 8-Blade Nitrile Impeller 14750-0003-P for Marine Water Pumps and Bilge Pumps","description":"\u003cp\u003eThe Jabsco 8-Blade Impeller, part number 14750-0003-P, is a nitrile replacement impeller built to fit a variety of pumps used in marine applications, including marine engine water pumps and bilge pumps. Its nitrile construction offers compatibility with oil products and handles a wide range of fluids, including oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, and lubricating and machine cutting oil, making it well suited to pumps that see contaminated water or oily fluid rather than clean coolant alone.\u003c\/p\u003e\u003cp\u003eThe impeller uses a single flat drive with 8 blades and a brass insert\/hub for the drive connection. It is supplied as a kit, including a gasket, O-rings, and a glycerin lubricating packet to aid installation. Flexible impellers are a wear item, and it is common practice to inspect and replace them annually as preventative maintenance against pump failure, so keeping a spare 14750-0003-P on board is a practical step for anyone relying on this pump for engine cooling or bilge duty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14750-0003-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e Nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert\/Hub Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Single Flat Drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15-32 inches (12mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 5\/16 inch (8mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Diameter:\u003c\/strong\u003e 1-1\/4 inch (32mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Gasket, O-Rings, and Glycerin Lubricating Packet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Pump Types:\u003c\/strong\u003e Marine engine water pumps and bilge pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Compatibility:\u003c\/strong\u003e Oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880575041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pumps does the Jabsco 14750-0003-P impeller fit?\u003c\/strong\u003e The Jabsco 14750-0003-P 8-Blade Impeller fits a variety of pumps used in marine applications, including marine engine water pumps and bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 14750-0003-P impeller made from?\u003c\/strong\u003e This impeller is made from nitrile with a brass insert\/hub, a combination chosen for pumping oil or transferring heavily contaminated water rather than clean coolant alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this impeller handle oily or contaminated fluids?\u003c\/strong\u003e Yes. The nitrile construction of the Jabsco 14750-0003-P handles oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, and lubricating and machine cutting oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many blades does this impeller have?\u003c\/strong\u003e The Jabsco 14750-0003-P has 8 blades with a single flat drive configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 14750-0003-P impeller?\u003c\/strong\u003e It has a width of 15-32 inches (12mm), a shaft diameter of 5\/16 inch (8mm), and an overall diameter of 1-1\/4 inch (32mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this impeller kit?\u003c\/strong\u003e The Jabsco 14750-0003-P kit includes the impeller along with a gasket, O-rings, and a glycerin lubricating packet to assist with installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should this impeller be replaced?\u003c\/strong\u003e It is common practice to inspect and replace flexible impellers like the Jabsco 14750-0003-P annually as preventative maintenance against pump failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a nitrile impeller used instead of neoprene?\u003c\/strong\u003e Neoprene construction is suited to clean engine cooling pumps, while nitrile, as used in the Jabsco 14750-0003-P, is suited to bilge pumps or transfer duties where water is heavily contaminated with oil or diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an authentic Jabsco part?\u003c\/strong\u003e Yes, part number 14750-0003-P is a genuine Jabsco 8-Blade Impeller, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I keep a spare of this impeller on board?\u003c\/strong\u003e Keeping a spare water pump impeller such as the Jabsco 14750-0003-P on board is recommended for the engine coolant system in case replacement is needed underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drive type of this impeller?\u003c\/strong\u003e The Jabsco 14750-0003-P uses a single flat drive to engage with the pump shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the insert or hub made of on this impeller?\u003c\/strong\u003e The insert\/hub of the Jabsco 14750-0003-P is made of brass.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221665499,"sku":"ITT-14750-0003-P","price":44.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-14750-0003_lg__38632.1558116534.500.750.jpg?v=1785164553","url":"https:\/\/www.goodvibesmarina.com\/products\/jabsco-8-blade-nitrile-impeller-14750-0003-p-for-marine-water-pumps-and-bilge-pumps","provider":"Good Vibes Marina","version":"1.0","type":"link"}