{"product_id":"jabsco-permanent-marine-oil-drain-hose-kit-18080-0000-with-reinforced-hose-and-threaded-cap","title":"Jabsco Permanent Marine Oil Drain Hose Kit 18080-0000 with Reinforced Hose and Threaded Cap","description":"\u003cp\u003eThe Jabsco Permanent Marine Oil Drain Hose Kit gives boat owners a clean, repeatable way to change engine oil without the mess of disconnecting hoses or fumbling with a dipstick tube. Once installed, the kit stays in place on the engine, so every future oil change can be done simply by gravity draining or by connecting a Jabsco oil changer pump to the hose end.\u003c\/p\u003e\u003cp\u003eThe kit is built around a 1\/2 inch - 20 threaded oil drain fitting that offers two hose connection points, allowing the hose to be oriented in whichever direction suits the installation. A reinforced, flexible, oil-rated drain hose runs from this fitting to a convenient location, where a hose hanger secures the free end above the oil line to prevent drips and mess between changes. When not in use, a threaded cap seals the hose end to keep the system clean and ready for the next service interval.\u003c\/p\u003e\u003cp\u003eThe kit includes the drain plug fitting, the oil drain hose assembly, the hose hanger, and the cap, giving you everything needed for a complete permanent drain setup in one package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18080-0000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic, Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Fitting Thread Size:\u003c\/strong\u003e 1\/2 inch - 20 threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Connection Points:\u003c\/strong\u003e Two\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Drain plug fitting, oil drain hose assembly, hose hanger, cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Jabsco 18080-0000 Permanent Oil Drain Hose Kit?\u003c\/strong\u003e The kit includes a drain plug fitting, a reinforced oil-rated drain hose assembly, a hose hanger, and a threaded cap that seals the hose end when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this oil drain kit make future oil changes easier?\u003c\/strong\u003e Once the Jabsco 18080-0000 kit is permanently installed on the engine, future oil changes can be done either by gravity draining or by connecting a Jabsco oil changer pump to the hose, without needing to disconnect any fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the drain fitting on this kit?\u003c\/strong\u003e The drain fitting is 1\/2 inch - 20 threaded and provides two hose connection points so the hose can be oriented in the desired direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Jabsco oil drain hose kit made from?\u003c\/strong\u003e The kit is made from plastic and rubber components, including a reinforced flexible hose rated for oil service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco Permanent Oil Drain Hose Kit weigh?\u003c\/strong\u003e The 18080-0000 kit weighs 0.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the hose hanger work?\u003c\/strong\u003e The hose hanger secures the free end of the drain hose above the oil line, keeping it in a clean, accessible position between oil changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hose end sealed when the kit is not being used to drain oil?\u003c\/strong\u003e Yes, a threaded cap included with the Jabsco 18080-0000 kit seals the hose end to keep the system clean when it is not actively draining oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the drain hose?\u003c\/strong\u003e The drain hose has an outside diameter of 0.5 inches and a nominal wall thickness of 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used with more than one type of oil change pump?\u003c\/strong\u003e Yes, the Jabsco 18080-0000 kit is designed to connect to several different pump types through its two hose connection points, making it compatible with multiple oil-change methods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a one-time installation or does it need to be reinstalled for every oil change?\u003c\/strong\u003e The Jabsco Permanent Oil Drain Hose Kit is designed as a permanent installation, so once it is fitted, it remains in place and is simply used or capped between oil changes.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028221894875,"sku":"ITT-18080-0000","price":92.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-18080-0000_lg__61151.1558116964.500.750.jpg?v=1785164559","url":"https:\/\/www.goodvibesmarina.com\/products\/jabsco-permanent-marine-oil-drain-hose-kit-18080-0000-with-reinforced-hose-and-threaded-cap","provider":"Good Vibes Marina","version":"1.0","type":"link"}