{"product_id":"jabsco-vented-loop-29015-0010-for-1-5-inch-hose-marine-toilet-waste-discharge-siphon-break","title":"Jabsco Vented Loop 29015-0010 for 1.5 Inch Hose - Marine Toilet Waste Discharge Siphon Break","description":"\u003cp\u003eThe Jabsco Vented Loop 29015-0010 is a vented loop fitting sized for 1.5 inch hose, built for the inlet and discharge plumbing of marine toilets. It is an essential safety component on any toilet installed below the static or heeled waterline, where a straight run of hose could allow water to siphon back into the boat. The vented loop uses a simple valve system that opens to break the siphon whenever the loop is not under positive pressure, ensuring that water cannot siphon over the pipe loop and flood the head or bilge.\u003c\/p\u003e\u003cp\u003eThis vented loop is moulded in tough plastic for corrosion resistance in the marine environment, an advantage over metal loop fittings that can corrode from constant exposure to seawater and waste discharge. It is intended for use in the waste discharge loop of the toilet system, positioned at the high point of the hose run above the waterline. Because it is sized specifically for 1.5 inch hose, it is intended as a direct fit into existing 1.5 inch marine toilet plumbing runs without needing to change hose diameter elsewhere in the system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jabsco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 29015-0010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 671880529495\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Toilet inlet and discharge plumbing, waste discharge loop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the Jabsco 29015-0010 vented loop fit?\u003c\/strong\u003e The Jabsco 29015-0010 vented loop is sized for 1.5 inch hose, matching the standard hose diameter used on most marine toilet inlet and discharge plumbing runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a marine toilet need a vented loop?\u003c\/strong\u003e A vented loop is required on any toilet installed below the static or heeled waterline because it prevents water from siphoning back through the inlet or discharge hose. The Jabsco 29015-0010 uses a valve that opens to break the siphon whenever the line is not under positive pressure, stopping water from flowing over the loop and into the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the vented loop made of?\u003c\/strong\u003e The Jabsco 29015-0010 is moulded in tough plastic, which resists corrosion from continuous exposure to seawater and waste discharge, unlike bare metal fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should this vented loop be installed?\u003c\/strong\u003e It is installed in the waste discharge loop of the toilet plumbing, at the high point of the hose run above the static or heeled waterline, on either the inlet or discharge side of the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Jabsco 29015-0010 weigh?\u003c\/strong\u003e The Jabsco 29015-0010 vented loop weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Jabsco vented loop?\u003c\/strong\u003e The Jabsco 29015-0010 vented loop is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this vented loop be used on both the inlet and discharge lines?\u003c\/strong\u003e Yes, the 29015-0010 is used on the inlet and discharge plumbing of toilets, and is specifically noted for use in the waste discharge loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if a toilet plumbing run does not have a vented loop?\u003c\/strong\u003e Without a vented loop like the Jabsco 29015-0010, water can siphon over a pipe loop that sits below the static or heeled waterline, potentially flooding the head or allowing backflow into the toilet bowl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Jabsco 29015-0010 a genuine Jabsco part?\u003c\/strong\u003e Yes, 29015-0010 is the Jabsco manufacturer part number for this 1.5 inch vented loop, identified by UPC 671880529495.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the vented loop include any valve mechanism?\u003c\/strong\u003e Yes, the 29015-0010 has a simple valve system built into the loop that ensures water cannot siphon back over the pipe loop during normal operation.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":49028222189787,"sku":"ITT-29015-0010","price":73.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ITT-29015-0010_lg__84337.1558117611.500.750.jpg?v=1785164565","url":"https:\/\/www.goodvibesmarina.com\/products\/jabsco-vented-loop-29015-0010-for-1-5-inch-hose-marine-toilet-waste-discharge-siphon-break","provider":"Good Vibes Marina","version":"1.0","type":"link"}