{"product_id":"johnson-pump-ultima-1000-gph-12v-bilge-pump-32-47260-003","title":"Johnson Pump Ultima 1000 GPH 12V Bilge Pump, 32-47260-003","description":"\u003cp\u003eThe Johnson Pump Ultima 1000 GPH Bilge Pump (32-47260-003) is a 12V DC submersible bilge pump built for continuous duty in boats needing reliable water removal. It features an integrated switch, so it is ready to install and run without a separate float switch. The pump body is molded from tough thermoplastic, while the shaft is stainless steel, giving the unit durability against corrosion and long-term wear in a wet bilge environment. Reverse wire protection ensures the pump is safe from incorrect polarity wiring during installation.\u003c\/p\u003e\u003cp\u003eTwo DuraPort discharge port options are included: a straight port and a 90 degree smooth elbow port, so the pump can be plumbed to fit the available space in the bilge. The DuraPort design is engineered to resist stress cracking that can occur when hose clamps are over-tightened, a common failure point on lower-quality bilge pumps. A removable check valve is also included, helping prevent backflow of water into the bilge once the pump shuts off.\u003c\/p\u003e\u003cp\u003eAt full straight-line capacity, the Ultima 1000 GPH moves 1000 gallons per hour; at a 3 foot head, output is rated at 700 gallons per hour. It draws 3.2 amps and is designed for use with a 5 amp fuse, and connects via a 3\/4 inch discharge fitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Johnson Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 32-47260-003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate (Straight):\u003c\/strong\u003e 1000 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate at 3 Foot Head:\u003c\/strong\u003e 700 gallons per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 3.2 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fuse Size:\u003c\/strong\u003e 5 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Connection:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Ports Included:\u003c\/strong\u003e Straight DuraPort and 90 degree DuraPort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck Valve:\u003c\/strong\u003e Removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Integrated automatic switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Thermoplastic body with stainless steel shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 729321472609\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Johnson Pump 32-47260-003 bilge pump?\u003c\/strong\u003e This pump moves 1000 gallons per hour in a straight discharge run, and 700 gallons per hour when lifting water against a 3 foot head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 32-47260-003 come with a switch?\u003c\/strong\u003e Yes, the Johnson Pump Ultima 1000 GPH bilge pump has an integrated automatic switch built into the unit, so no separate float switch is required for basic operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fitting does this bilge pump use?\u003c\/strong\u003e The 32-47260-003 connects via a 3\/4 inch discharge port, and it includes both a straight DuraPort and a 90 degree DuraPort so you can choose the fitting that best matches your plumbing layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuse size should I use with this pump?\u003c\/strong\u003e A 5 amp fuse is the recommended size for the Johnson Pump 32-47260-003, which draws 3.2 amps during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bilge pump 12 volt or 24 volt?\u003c\/strong\u003e The 32-47260-003 is a 12V DC bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Johnson Pump Ultima 1000 GPH bilge pump?\u003c\/strong\u003e The pump measures 6 inches long, 3.2 inches wide, and 4.1 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 32-47260-003 weigh?\u003c\/strong\u003e This bilge pump weighs 1.3375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The Johnson Pump Ultima 1000 GPH bilge pump has a tough thermoplastic body paired with a stainless steel shaft for durability in a marine bilge environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 32-47260-003 include a check valve?\u003c\/strong\u003e Yes, a removable check valve is included with this pump, helping prevent water from flowing back into the bilge after the pump shuts off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 32-47260-003 protected against reversed wiring?\u003c\/strong\u003e Yes, this pump is reverse wire protected, which guards against damage from incorrect polarity during wiring and installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat discharge port options come with this pump?\u003c\/strong\u003e The Johnson Pump 32-47260-003 includes both a straight DuraPort discharge fitting and a 90 degree smooth elbow DuraPort fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the DuraPort fittings matter compared to a standard barbed outlet?\u003c\/strong\u003e The DuraPort discharge ports on the 32-47260-003 are designed to resist stress cracking caused by over-tightened hose clamps, a common failure point on standard bilge pump outlets.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":49031210041563,"sku":"JON-32-47260-003","price":112.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61E4tlKghgL.jpg?v=1785212058","url":"https:\/\/www.goodvibesmarina.com\/products\/johnson-pump-ultima-1000-gph-12v-bilge-pump-32-47260-003","provider":"Good Vibes Marina","version":"1.0","type":"link"}