{"product_id":"lenco-101-standard-replacement-trim-tab-actuator-oem-20400-001-750-lb-push-12v","title":"Lenco 101 Standard Replacement Trim Tab Actuator, OEM 20400-001, 750 lb Push, 12V","description":"\u003cp\u003eThe Lenco 15054-001 101 Standard Replacement Trim Tab Actuator is a fully submersible, maintenance-free electric actuator built to drive trim tab movement so a boat's running attitude, stability, and ride quality can be adjusted on the water. It replaces the actuator on compatible standard Lenco trim tab systems and is engineered to deliver 750 lbs (340.18 kg) of push force from a 12V high-torque motor, roughly twice the force of a comparable hydraulic actuator. A self-locking stainless steel ball screw riding on 12 bearings holds tab position precisely without drift, so no separate limit switches or clutches are needed. Construction pairs a high-impact, UV-resistant Nylon 66 housing with a stainless steel ram and a corrosion-proof Vandar top cap, and the assembly seals for life so it operates underwater in both saltwater and freshwater without lubrication or upkeep. Waterproof Deutsch connectors give a watertight, plug-and-play electrical connection, and precision-molded, powdered-metal, high-alloy gears are built for long-term wear resistance and accuracy. The actuator has a 2-1\/4 inch stroke length, a 12-1\/8 inch overall tip-to-tip length, a 6 foot wire, and 5\/16 inch top cap and end holes, with all necessary mounting hardware included for installation. It is backed by a 5-year limited warranty covering defects in materials and workmanship.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15054-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20400-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Load:\u003c\/strong\u003e 750 lbs (340.18 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 12-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact Nylon 66 housing with stainless steel components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, SeaDoo Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Lenco 15054-001 actuator is designed to fit Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, and SeaDoo Kits. Review your current trim tab setup and part numbers to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20400-001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15054-001 101 Standard Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 15054-001 101 Standard Replacement Trim Tab Actuator controls trim tab movement to adjust a boat's running attitude, stability, and ride quality, and it is designed as a replacement actuator for standard Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich trim tab systems is the 15054-001 actuator compatible with?\u003c\/strong\u003e The Lenco 15054-001 actuator is designed to fit Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, and SeaDoo Kits. Review your current trim tab setup and part numbers to confirm compatibility before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much push force does this actuator produce?\u003c\/strong\u003e This actuator delivers 750 lbs (340.18 kg) of push force from its 12V high-torque motor, about twice the force of a typical hydraulic trim tab actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for the Lenco 15054-001 actuator?\u003c\/strong\u003e The Lenco 15054-001 101 Standard Replacement Trim Tab Actuator corresponds to OEM part number 20400-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator suitable for both saltwater and freshwater use?\u003c\/strong\u003e Yes. The 15054-001 actuator features a corrosion-proof, watertight Vandar top cap, stainless steel components, and a high-impact, UV-resistant Nylon 66 housing, making it well suited to both saltwater and freshwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the stroke length and overall dimensions of this actuator?\u003c\/strong\u003e The Lenco 101 Standard Replacement Trim Tab Actuator has a 2-1\/4 inch stroke length and a 12-1\/8 inch overall tip-to-tip length, with a 6 foot wire and 5\/16 inch top cap and end holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replacement actuator include mounting hardware?\u003c\/strong\u003e Yes. All necessary mounting hardware is included with the Lenco 15054-001 actuator for a straightforward installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Lenco 101 actuator made from, and is it corrosion-resistant?\u003c\/strong\u003e The actuator features a high-impact, UV-resistant Nylon 66 housing, a corrosion-proof Vandar top cap, and a stainless steel ram, making it highly durable and resistant to marine environmental wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15054-001 actuator have a built-in position sensor?\u003c\/strong\u003e No, the Lenco 101 Standard Replacement Trim Tab Actuator does not have a built-in position sensor. Instead, a self-locking stainless steel ball screw locks the tab into position and prevents drift, giving precise control without needing a sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my current trim tab actuator needs to be replaced?\u003c\/strong\u003e Signs that a trim tab actuator needs replacement include difficulty adjusting trim, persistent listing, slow or unresponsive tab movement, erratic behavior, grinding or humming noises without movement, and visible corrosion or fluid leaks. If checking electrical connections and mounting brackets does not resolve the issue, a replacement actuator like the Lenco 15054-001 restores proper trim performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator covered under warranty?\u003c\/strong\u003e Yes, the Lenco 15054-001 actuator is backed by a 5-year limited warranty covering defects in materials and workmanship under normal usage and maintenance conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the 15054-001 actuator use for wiring?\u003c\/strong\u003e The Lenco 101 Standard Replacement Trim Tab Actuator uses waterproof, plug-and-play Deutsch connectors that provide a watertight seal and simplify installation.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995042011,"sku":"LEN-15054-001","price":256.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15054-001-standard-electric-replacement-trim-tab-actuator__82291.1744119043.500.750.jpg?v=1785164599","url":"https:\/\/www.goodvibesmarina.com\/products\/lenco-101-standard-replacement-trim-tab-actuator-oem-20400-001-750-lb-push-12v","provider":"Good Vibes Marina","version":"1.0","type":"link"}