{"product_id":"lenco-101xds-short-replacement-trim-tab-actuator-12v-oem-20402-002-3-8-inch-hardware","title":"Lenco 101XDS Short Replacement Trim Tab Actuator, 12V, OEM 20402-002, 3\/8 Inch Hardware","description":"\u003cp\u003eThe Lenco 101XDS Short Replacement Trim Tab Actuator (part number 15058-001) is a 12V electric actuator built to replace the actuator on compatible Lenco trim tab systems. It uses Lenco's ball screw design, which the manufacturer states is twice as powerful compared to typical hydraulic actuators and more reliable in service. A high-torque 12V motor pushes 500 lbs, giving the trim tabs durable, instant response without the maintenance demands of a hydraulic system.\u003c\/p\u003e\u003cp\u003eConstruction is purpose-built for the marine environment. Precision-molded, powdered-metal, high-alloy gears deliver high accuracy, wear resistance, and strength for long life. The actuator has an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that eliminates the possibility of water intrusion while allowing easy plug-and-play installation. The housing is molded from high-impact, ultraviolet-resistant nylon.\u003c\/p\u003e\u003cp\u003eConstruction upgrades over earlier designs include a stronger top cap mounting clevis, new and improved pressure-tight Torx screws, a molded-in thrust bearing, a thicker and stronger motor housing wall, an over-molded cable for a tighter seal, and an upper mounting bracket with a gland seal. This actuator has a 3\/8 inch top hole and a 3\/8 inch end hole, a 2-1\/4 inch stroke length, and an overall tip-to-tip length of 10-7\/8 inches. The kit includes all necessary mounting hardware and a 6 foot wire for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15058-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20402-002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 10-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet-resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof Deutsch connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003230\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis actuator is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20402-002\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15058-001 101XDS Short Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 101XDS Short Replacement Trim Tab Actuator (part 15058-001) controls trim tab movement to adjust a boat's running attitude, stability, and ride quality, and is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for this Lenco actuator?\u003c\/strong\u003e The Lenco 101XDS Short Replacement Trim Tab Actuator, part number 15058-001, corresponds to OEM part number 20402-002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much push force does the 101XDS short actuator produce?\u003c\/strong\u003e 500 lbs of push force is delivered by the high-torque 12V motor in the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the stroke length and overall dimensions of part 15058-001?\u003c\/strong\u003e This actuator has a 2-1\/4 inch stroke length and an overall tip-to-tip length of 10-7\/8 inches, with a 3\/8 inch top hole and a 3\/8 inch end hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator waterproof and suitable for marine use?\u003c\/strong\u003e Yes, the Lenco 15058-001 actuator is built for marine environments with an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that helps prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 101XDS short actuator kit include mounting hardware?\u003c\/strong\u003e Yes, the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001) includes all necessary mounting hardware along with a 6 foot wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 101XDS actuator housing made from?\u003c\/strong\u003e The housing on part number 15058-001 is molded from high-impact, ultraviolet-resistant nylon for durability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this Lenco trim tab actuator require?\u003c\/strong\u003e 12V is the voltage rating of the Lenco 101XDS Short Replacement Trim Tab Actuator, part 15058-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 101XDS actuator wired for installation?\u003c\/strong\u003e A waterproof Deutsch connector is used on the Lenco 15058-001 actuator, making for easy plug-and-play installation with the included 6 foot wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat construction improvements does this actuator have over earlier designs?\u003c\/strong\u003e Part number 15058-001 features a stronger top cap mounting clevis design, pressure-tight Torx screws, a molded-in thrust bearing, a thicker motor housing wall, an over-molded cable, and an upper mounting bracket with a gland seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the ball screw design in this Lenco actuator considered more reliable?\u003c\/strong\u003e The ball screw design used in the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001) is stated by the manufacturer to be twice as powerful compared to typical hydraulic actuators, resulting in more reliable operation and durable, instant response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the top cap hole and end hole sizes on this actuator?\u003c\/strong\u003e Both the top cap hole and the end hole on the Lenco 15058-001 actuator measure 3\/8 inch.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995173083,"sku":"LEN-15058-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15058-001-101xds-short-electric-replacement-trim-tab-actuator__67333.1744119514.500.750.jpg?v=1785164599","url":"https:\/\/www.goodvibesmarina.com\/products\/lenco-101xds-short-replacement-trim-tab-actuator-12v-oem-20402-002-3-8-inch-hardware","provider":"Good Vibes Marina","version":"1.0","type":"link"}