{"product_id":"lenco-15064-001-retrofit-kit-for-12v-electric-bennett-trim-tab-systems","title":"Lenco 15064-001 RetroFit Kit for 12V Electric Bennett Trim Tab Systems","description":"\u003cp\u003eThe Lenco 15064-001 RetroFit Kit lets you upgrade a boat equipped with standard length Bennett hydraulic trim tab cylinders to Lenco's 12V electric actuator technology, without any drilling or filling of the transom. Instead of replacing an entire trim tab system, this kit lets you discard the Bennett hydraulic pump unit and the two Bennett cylinders, then install two Lenco electric actuators in their place using the existing trim planes.\u003c\/p\u003e\u003cp\u003eEach kit includes two Bennett-compatible Lenco electric actuators with 6' leads, two new-style upper mounting brackets, a switch wiring kit with jumper wires for connecting to your existing switch harness, and all necessary mounting hardware. Complete installation instructions are included, and the actuator wiring connects directly into the existing harness. The kit does not include a switch; you can continue using your existing switch or purchase one separately.\u003c\/p\u003e\u003cp\u003eThis retrofit kit is built for boats currently running standard length Bennett hydraulic cylinders and is not intended for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15064-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 14.5 x 6.75 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets Included:\u003c\/strong\u003e 2 Upper Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No (existing or separately purchased switch required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to retrofit boats equipped with standard length Bennett hydraulic trim tab cylinders. Not intended for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer-listed OEM cross-reference numbers are specified for this retrofit kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15064-001 RetroFit Kit used for?\u003c\/strong\u003e The Lenco 15064-001 RetroFit Kit converts a boat equipped with standard length Bennett hydraulic trim tab cylinders over to Lenco's 12V electric actuator system, without drilling or filling the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with any boat that has Bennett trim tabs?\u003c\/strong\u003e The Lenco 15064-001 is designed for boats equipped with standard length Bennett hydraulic cylinders, but it is not meant for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco Bennett RetroFit Kit?\u003c\/strong\u003e The kit includes 2 Bennett-compatible Lenco electric actuators with 6' leads, 2 upper style mounting brackets, a switch wiring kit with jumper wires, and all necessary mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a new switch to use this retrofit kit?\u003c\/strong\u003e No. The Lenco 15064-001 does not include a switch, but jumper wires are included so you can connect to your existing switch, or you can purchase a switch separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installing the Lenco 15064-001 require drilling new holes in my transom?\u003c\/strong\u003e No. This RetroFit Kit is designed to install using your existing Bennett trim planes, so no drilling or filling of the transom is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads on the Lenco 15064-001?\u003c\/strong\u003e Each of the two electric actuators included in the Lenco 15064-001 RetroFit Kit has a 6-foot lead for wiring to the existing harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and a full new trim tab system?\u003c\/strong\u003e Instead of replacing an entire trim tab installation, the Lenco 15064-001 only replaces the Bennett hydraulic pump and cylinders, reusing your existing trim planes and switch wiring with new Lenco electric actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15064-001 RetroFit Kit weigh?\u003c\/strong\u003e The Lenco 15064-001 RetroFit Kit weighs 6.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Lenco Bennett RetroFit Kit packaging?\u003c\/strong\u003e The Lenco 15064-001 measures 14.5 x 6.75 x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse my existing Bennett switch with this Lenco retrofit kit?\u003c\/strong\u003e Yes. The Lenco 15064-001 includes jumper wires specifically for attaching the new actuator wiring to your existing switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15064-001 a genuine Lenco product?\u003c\/strong\u003e Yes, the 15064-001 RetroFit Kit is a genuine Lenco Marine product engineered specifically to upgrade Bennett hydraulic systems to Lenco electric actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco RetroFit Kit include installation instructions?\u003c\/strong\u003e Yes. Complete installation instructions are included with the Lenco 15064-001 RetroFit Kit.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995271387,"sku":"LEN-15064-001","price":409.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15064-001-RetroFit-Kit-for-12V-Electric-Bennett-Systems__00310.1739458566.500.750.jpg?v=1785164604","url":"https:\/\/www.goodvibesmarina.com\/products\/lenco-15064-001-retrofit-kit-for-12v-electric-bennett-trim-tab-systems","provider":"Good Vibes Marina","version":"1.0","type":"link"}