{"product_id":"lenco-marine-actuator-extension-harness-14-foot-16-awg-part-30133-002d","title":"Lenco Marine Actuator Extension Harness, 14 Foot, 16 AWG, Part 30133-002D","description":"\u003cp\u003eThe Lenco Marine Actuator Extension Harness (Part 30133-002D) is a 14 foot, 16 AWG copper wiring harness built to extend the connection between a Lenco trim tab actuator and its control module or switch panel. It is designed for boats where the factory-length cable does not reach, such as larger vessels or installations that route the actuator and helm control farther apart than a standard run allows.\u003c\/p\u003e\u003cp\u003eThe harness uses 16 gauge copper conductors paired with corrosion-resistant connectors, giving it the durability needed for a marine electrical environment where moisture and salt exposure are constant concerns. The 14 foot length gives installers flexibility in routing the cable through the hull, bilge, or console while keeping the run clean and manageable rather than forcing a cramped, makeshift extension.\u003c\/p\u003e\u003cp\u003eThis harness is intended as a direct extension for Lenco trim tab actuator wiring, making it a straightforward upgrade or replacement when rerouting a system, relocating a switch panel, or completing a new trim tab installation that requires additional cable length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30133-002D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Extension Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 16 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 30133-002D harness used for?\u003c\/strong\u003e It is an actuator extension harness that lengthens the wiring run between a Lenco trim tab actuator and the control module or switch panel, useful when the factory cable does not reach the desired mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this extension harness?\u003c\/strong\u003e The 30133-002D harness measures 14 feet in length, giving enough extra cable to route through longer bilge or console runs on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge does the harness use?\u003c\/strong\u003e It is built with 16 AWG copper wire, sized to carry the actuator's power and signal reliably over the full 14 foot run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the conductors made of?\u003c\/strong\u003e The conductors in the Lenco 30133-002D harness are copper, paired with corrosion-resistant connectors suited to a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this harness work with any Lenco trim tab actuator?\u003c\/strong\u003e The 30133-002D is designed as an extension cable for Lenco trim tab actuator wiring, connecting the actuator to the control module or switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the harness weigh?\u003c\/strong\u003e The Lenco 30133-002D actuator extension harness weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the harness?\u003c\/strong\u003e The 30133-002D ships in packaging measuring 8 x 5 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many harnesses are included?\u003c\/strong\u003e Each 30133-002D package contains one actuator extension harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lenco part?\u003c\/strong\u003e Yes, the 30133-002D is a genuine Lenco Marine actuator extension harness, not a generic aftermarket cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an extension harness instead of the standard cable?\u003c\/strong\u003e An extension harness like the 30133-002D is needed when the actuator and control module or switch panel are farther apart than the factory wiring allows, such as on larger boats or relocated helm stations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the connectors weatherproof?\u003c\/strong\u003e The 30133-002D uses corrosion-resistant connectors designed to hold up in the wet, salt-exposed conditions typical of marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this harness?\u003c\/strong\u003e The Lenco 30133-002D actuator extension harness has UPC 874847003988.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49031285539035,"sku":"LEN-30133-002D","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61g6gt44jrL.jpg?v=1785212606","url":"https:\/\/www.goodvibesmarina.com\/products\/lenco-marine-actuator-extension-harness-14-foot-16-awg-part-30133-002d","provider":"Good Vibes Marina","version":"1.0","type":"link"}