{"product_id":"lenco-marine-trim-tab-actuator-extension-harness-20-foot-14-gauge-cable-part-30133-103d","title":"Lenco Marine Trim Tab Actuator Extension Harness, 20 Foot 14 Gauge Cable, Part 30133-103D","description":"\u003cp\u003eThe Lenco Marine Actuator Extension Harness (part number 30133-103D) is a 20 foot, 14 gauge extension cable built to run power from a Lenco trim tab helm or control unit out to the actuator when the factory-length wiring will not reach. The harness uses a copper core conductor with PVC insulation for reliable current flow and protection against moisture and abrasion in the bilge or transom area, and it terminates in a DT connector for a secure, weatherproof plug-in connection to compatible Lenco actuator wiring. At 0.06 inches in wire diameter, the cable is sized to handle actuator current draw over the full 20 foot run without a bulky gauge upgrade.\u003c\/p\u003e\u003cp\u003eThis harness is intended as a straightforward extension for boats where the trim tab actuators sit farther from the helm or control box than the stock cable allows, letting installers avoid splicing and add-on connectors. It ships as a single 20 foot cable, ready to connect between the existing Lenco wiring and the actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30133-103D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 14 GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter:\u003c\/strong\u003e 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e DT Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper (core), PVC (insulation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Dimensions:\u003c\/strong\u003e 9 x 12 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with compatible Lenco Marine trim tab actuator wiring systems using a DT connector.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lenco 30133-103D actuator extension harness?\u003c\/strong\u003e The 30133-103D harness measures 20 feet in length, giving enough extra cable to route power from the helm or control unit to a trim tab actuator that sits beyond the reach of the factory wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire does this Lenco extension cable use?\u003c\/strong\u003e It is built with 14 gauge (14 GA) wire, measuring 0.06 inches in wire diameter, sized to carry actuator current over the full 20 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector is on the Lenco 30133-103D harness?\u003c\/strong\u003e This harness terminates in a DT connector, which plugs into compatible Lenco Marine trim tab actuator wiring for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the actuator extension cable made from?\u003c\/strong\u003e The cable uses a copper core conductor with PVC insulation, a combination chosen for good conductivity along with resistance to moisture and abrasion in a boat's bilge or transom area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill part number 30133-103D work with any trim tab system?\u003c\/strong\u003e The 30133-103D extension harness is built for Lenco Marine trim tab actuator wiring that uses a matching DT connector; it is not a universal cable for other brands' systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 30133-103D cable weigh?\u003c\/strong\u003e The Lenco 30133-103D actuator extension harness weighs 0.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this harness?\u003c\/strong\u003e As packaged, the 30133-103D cable measures 9 x 12 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in one package?\u003c\/strong\u003e Each package of the Lenco 30133-103D harness contains one 20 foot extension cable (unit count of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an actuator extension harness instead of the stock wiring?\u003c\/strong\u003e An extension harness like the Lenco 30133-103D is used when the factory-length actuator wiring cannot reach from the helm or control box to the actuator location, avoiding the need to splice or add extra connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 30133-103D harness genuine Lenco Marine product?\u003c\/strong\u003e Yes, part number 30133-103D is manufactured by Lenco Marine as an actuator extension cable for its trim tab systems.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49031285571803,"sku":"LEN-30133-103D","price":40.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Uvl8Gn1iL.jpg?v=1785212606","url":"https:\/\/www.goodvibesmarina.com\/products\/lenco-marine-trim-tab-actuator-extension-harness-20-foot-14-gauge-cable-part-30133-103d","provider":"Good Vibes Marina","version":"1.0","type":"link"}