{"product_id":"magma-a10-223-type-3-low-pressure-lpg-control-valve-for-marine-grills","title":"Magma A10-223 LPG Low Pressure Control Valve, Type 3, Medium Output for 12 Inch x 18 Inch Grills","description":"\u003cp\u003eThe Magma A10-223 is a Type 3 low pressure control valve, medium output, built to convert a Magma grill from its original Type 1 control valve\/regulator and 1-lb propane fuel canister to a pre-regulated, low pressure, on-board LPG (propane) system. This is the setup boat owners use to tie their Magma grill into the vessel's permanent propane supply instead of running through disposable 1-lb canisters.\u003c\/p\u003e\u003cp\u003eConstruction is stainless steel and brass, chosen to hold up to sustained exposure to salt air and moisture in a marine environment. The valve connects specifically to the low-pressure side of the system's regulator, which keeps fuel delivery to the grill consistent and safe. It has two ports with compression-type inlet and outlet connections, a 0.25 inch outlet connection size, and 1\/4 inch NPT compression thread fittings.\u003c\/p\u003e\u003cp\u003eThis valve is designed for Magma rectangular gas grills with a 12 inch x 18 inch grill surface. Hose and tank fittings are not included, which leaves the final connection open for you to customize to your specific on-board propane system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Magma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A10-223\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Low Pressure Control Valve, Type 3, Medium Output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel and brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.8 x 4.8 x 1.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrill Compatibility:\u003c\/strong\u003e 12 inch x 18 inch grill surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Low Pressure Control Valve, Type 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMagma rectangular gas grills with a 12 inch x 18 inch grill surface, converting from a Type 1 control valve\/regulator and 1-lb propane fuel canister\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Magma A10-223 control valve do?\u003c\/strong\u003e It converts a Magma grill from its original Type 1 control valve\/regulator and 1-lb propane fuel canister to a pre-regulated, low pressure, on-board LPG (propane) system, so the grill can run off a boat's permanent propane supply instead of disposable canisters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich grills does the A10-223 fit?\u003c\/strong\u003e The A10-223 is designed for Magma rectangular gas grills with a 12 inch x 18 inch grill surface that currently use a Type 1 control valve and 1-lb propane canister.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A10-223 a Type 1, Type 2, or Type 3 valve?\u003c\/strong\u003e The Magma A10-223 is a Type 3 low pressure control valve with medium output, used to replace a Type 1 setup on compatible Magma grills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre hose and tank fittings included with this valve?\u003c\/strong\u003e No, hose and tank fittings are not included with the A10-223. It ships as the control valve only, so you can connect it to your specific on-board propane system's existing hose and fitting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the A10-223 control valve made from?\u003c\/strong\u003e The A10-223 is made from stainless steel and brass, materials chosen to resist corrosion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the A10-223?\u003c\/strong\u003e The Magma A10-223 measures 7.8 x 4.8 x 1.8 inches and weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the connections on the A10-223?\u003c\/strong\u003e The A10-223 has compression-type inlet and outlet connections, a 0.25 inch outlet connection size, and 1\/4 inch NPT compression thread fittings, with 2 ports total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich side of the regulator does the A10-223 connect to?\u003c\/strong\u003e The A10-223 connects to the low-pressure side of the system's regulator, which provides consistent and safe fuel delivery to the grill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the A10-223 be used with a permanent on-board LPG tank?\u003c\/strong\u003e Yes, that is its purpose: the A10-223 lets a Magma grill be integrated into a pre-regulated, low pressure, on-board LPG (propane) system rather than running on 1-lb disposable canisters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A10-223 the same valve used on Magma grills sold in Australia, New Zealand, or Europe?\u003c\/strong\u003e No, the A10-223 is the United States version of this Type 3 low pressure control valve; Magma grills sold in other regions use separate part numbers for their equivalent valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace or upgrade my grill's control valve to the A10-223?\u003c\/strong\u003e Boat owners upgrade to the A10-223 to move away from disposable 1-lb propane canisters and connect their Magma grill directly to the vessel's on-board propane supply through a pre-regulated, low pressure system.\u003c\/p\u003e","brand":"Magma","offers":[{"title":"Default Title","offer_id":49025264255195,"sku":"MAG-A10-223","price":53.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/a10-219_coverImage_square_6aef45ab-d5c5-4983-85eb-a71bee1777f8.jpg?v=1784999709","url":"https:\/\/www.goodvibesmarina.com\/products\/magma-a10-223-type-3-low-pressure-lpg-control-valve-for-marine-grills","provider":"Good Vibes Marina","version":"1.0","type":"link"}