{"product_id":"maxwell-sp5104-reversing-solenoid-12v-dual-direction-solenoid-pack-200-amp-continuous","title":"Maxwell SP5104 Reversing Solenoid, 12V Dual-Direction Solenoid Pack, 200+ Amp Continuous","description":"\u003cp\u003eThe Maxwell SP5104 Reversing Solenoid is a 12V dual-direction solenoid pack used in conjunction with a remote up\/down panel, an Auto Anchor 500C\/RC control, a roving hand held remote control, and\/or foot switches to switch the windlass motor in the required direction. It houses heavy-duty solenoids rated at more than 200 amps continuous, giving it the switching capacity needed for windlass motor loads. The unit is sealed in a weather proof box, though installation in a dry area is always recommended for best long-term reliability. Optional ignition protected solenoids are also available for this line. The SP5104 was formerly sold as part number P19045, so buyers replacing an older unit under that designation should order the SP5104 as its current equivalent. This solenoid pack is finished in black and built for 12V windlass control systems that need a dedicated dual-direction switching unit rather than a single-direction solenoid. It is a straightforward swap-in replacement for the same position in a Maxwell windlass control circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Maxwell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SP5104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 9414761131780\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Amp Rating:\u003c\/strong\u003e More than 200 amps continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Configuration:\u003c\/strong\u003e Dual direction (reversing) solenoid pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Sealed, weather proof box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.0 inches x 5.0 inches x 3.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormer Part Number:\u003c\/strong\u003e P19045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with a remote up\/down panel, Auto Anchor 500C\/RC control, roving hand held remote control, and\/or foot switches to control windlass motor direction.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eP19045\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Maxwell SP5104 used for?\u003c\/strong\u003e The Maxwell SP5104 is a 12V reversing solenoid pack that switches a windlass motor in the required direction when used with a remote up\/down panel, an Auto Anchor 500C\/RC control, a hand held remote, and\/or foot switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SP5104 a single solenoid or a set?\u003c\/strong\u003e The SP5104 is a solenoid pack containing dual direction, heavy-duty solenoids housed together in one weather proof box, not a single solenoid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amperage is the SP5104 rated for?\u003c\/strong\u003e The solenoids in the Maxwell SP5104 pack are rated at more than 200 amps continuous, which covers typical windlass motor switching loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SP5104 waterproof?\u003c\/strong\u003e The SP5104 reversing solenoid is sealed in a weather proof box, though Maxwell recommends installing it in a dry location whenever possible for the longest service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SP5104 replace part number P19045?\u003c\/strong\u003e Yes, the Maxwell SP5104 was formerly sold as part number P19045, so it is the current version of that same reversing solenoid pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SP5104 weigh?\u003c\/strong\u003e The Maxwell SP5104 reversing solenoid pack weighs 1.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the SP5104 operate on?\u003c\/strong\u003e The SP5104 reversing solenoid pack is a 12V unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SP5104 housing?\u003c\/strong\u003e The Maxwell SP5104 solenoid pack has a black housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SP5104 be used with a foot switch instead of a panel?\u003c\/strong\u003e Yes, the SP5104 can be wired to work with foot switches, as well as a remote up\/down panel, Auto Anchor 500C\/RC control, or a roving hand held remote.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre ignition protected versions of the SP5104 available?\u003c\/strong\u003e Optional ignition protected solenoids are available for the SP5104 reversing solenoid pack for installations where that protection is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SP5104 housing made from?\u003c\/strong\u003e The Maxwell SP5104 reversing solenoid pack has a plastic housing.\u003c\/p\u003e","brand":"Maxwell Windlass","offers":[{"title":"Default Title","offer_id":49028228841691,"sku":"MAX-SP5104","price":264.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__28125.1763741579.500.750.jpg?v=1785165154","url":"https:\/\/www.goodvibesmarina.com\/products\/maxwell-sp5104-reversing-solenoid-12v-dual-direction-solenoid-pack-200-amp-continuous","provider":"Good Vibes Marina","version":"1.0","type":"link"}