{"product_id":"megaware-keelguard-skegguard-27081-stainless-steel-skeg-guard-fits-omc-cobra-evinrude-suzuki-outboards","title":"Megaware Keelguard SkegGuard 27081 Stainless Steel Skeg Guard - Fits OMC Cobra, Evinrude, Suzuki Outboards","description":"\u003cp\u003eThe Megaware Keelguard SkegGuard 27081 is a stainless steel skeg protector designed to shield an outboard motor's skeg from ramp dragging, submerged debris, and everyday wear on the water. It also serves as a repair option for a skeg that has already been damaged or broken, restoring function with as little as 2 to 3 inches of the original skeg remaining. The SkegGuard is built from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish, and it is engineered to conform closely to the shape of the skeg it is installed over. A drain hole at the bottom of the guard lets water escape after use, helping to prevent the trapped moisture that leads to corrosion or freeze damage in colder climates.\u003c\/p\u003e\u003cp\u003eInstallation is designed to be straightforward: using a rubber mallet, the SkegGuard is slid onto the existing skeg and tapped into place until fully seated, then secured through pre-drilled holes using a 1\/4-inch drill bit. The full installation is intended to take under 10 minutes. A 3mm lower wear tab adds extra protection at the point of the skeg most likely to strike bottom. The SkegGuard 27081 is fitment-specific and is built for OMC Cobra, Evinrude, and Suzuki outboard models as listed below; it does not fit the 2023 225hp and 250hp STEALTH models. The product is backed by a 3-year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megaware Keelguard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 27081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Skeg Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 18 Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mirror-Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 1.25 x 9 x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear Tab Thickness:\u003c\/strong\u003e 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Hole:\u003c\/strong\u003e Yes, prevents water collection and corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hardware Required:\u003c\/strong\u003e 1\/4-inch drill bit (holes pre-drilled in guard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Remaining Skeg Length for Installation:\u003c\/strong\u003e 2 to 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 672057270813\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOMC Cobra 4 cylinder, 1990-1993\u003c\/li\u003e\n\u003cli\u003eOMC Cobra V6-V8, 1986-1996 (does not fit King Cobra)\u003c\/li\u003e\n\u003cli\u003eEvinrude 150-175-200HP 2 Stroke, 2006-2020\u003c\/li\u003e\n\u003cli\u003eSuzuki DF150 SS\/AST, 2020-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki DF200ATLRSS, ATLXSS, AST, 2020-2022 (does not fit 2023 STEALTH)\u003c\/li\u003e\n\u003cli\u003eSuzuki DF250SS, 2008-2022 (does not fit 2023 STEALTH)\u003c\/li\u003e\n\u003cli\u003eSuzuki DF300T, 2007-2011 (does not fit AP or B Model)\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2023 225hp or 250hp STEALTH models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Megaware Keelguard SkegGuard 27081 do?\u003c\/strong\u003e It fits over an outboard motor's skeg to protect it from ramp dragging, submerged debris, and general wear, and it can also restore function to a skeg that is already damaged or broken.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard motors does the SkegGuard 27081 fit?\u003c\/strong\u003e The SkegGuard 27081 fits OMC Cobra 4 cylinder models from 1990-1993, OMC Cobra V6-V8 models from 1986-1996 (excluding King Cobra), Evinrude 150-175-200HP 2 Stroke motors from 2006-2020, and specific Suzuki DF150, DF200, DF250, and DF300T models as listed in the fitment section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SkegGuard 27081 fit the 2023 Suzuki STEALTH models?\u003c\/strong\u003e No. The SkegGuard 27081 does not fit the 2023 225hp and 250hp STEALTH models, nor the 2023 STEALTH versions of the DF200 or DF250.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SkegGuard 27081 made from?\u003c\/strong\u003e It is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much of the original skeg needs to remain to install this guard?\u003c\/strong\u003e The SkegGuard 27081 can be installed with as little as 2 to 3 inches of the original skeg remaining, making it usable even after significant skeg damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SkegGuard 27081 installed?\u003c\/strong\u003e Using a rubber mallet, the guard is slid onto the existing skeg and gently tapped until fully seated, then secured through its pre-drilled holes using a 1\/4-inch drill bit. The process is designed to take under 10 minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SkegGuard 27081 include a drain hole?\u003c\/strong\u003e Yes, a drain hole at the bottom of the SkegGuard 27081 lets water escape to help prevent corrosion or freeze damage from trapped moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SkegGuard 27081 weigh?\u003c\/strong\u003e The Megaware Keelguard SkegGuard 27081 weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SkegGuard 27081?\u003c\/strong\u003e The item measures 1.25 x 9 x 20 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SkegGuard 27081 covered by a warranty?\u003c\/strong\u003e Yes, the Megaware Keelguard SkegGuard 27081 comes with a 3-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the SkegGuard 27081 have?\u003c\/strong\u003e It has a silver, mirror-polished stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SkegGuard 27081 be used as a skeg repair rather than just protection?\u003c\/strong\u003e Yes, in addition to preventing future damage, the SkegGuard 27081 restores function to a skeg that is already worn, damaged, or broken, provided 2 to 3 inches of the original skeg remain.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":49027495723227,"sku":"MKI-27081","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81GQJBoEL3L_7a88650f-7062-4c23-a045-b67a770e1c7d.jpg?v=1785331034","url":"https:\/\/www.goodvibesmarina.com\/products\/megaware-keelguard-skegguard-27081-stainless-steel-skeg-guard-fits-omc-cobra-evinrude-suzuki-outboards","provider":"Good Vibes Marina","version":"1.0","type":"link"}