{"product_id":"megaware-keelguard-skegguard-27331-stainless-steel-skeg-protector-fits-yamaha-30-60hp-4-stroke-outboards","title":"Megaware Keelguard SkegGuard 27331 Stainless Steel Skeg Protector, Fits Yamaha 30-60HP 4-Stroke Outboards","description":"\u003cp\u003eThe Megaware Keelguard SkegGuard 27331 is a stainless steel skeg protector built to shield an outboard's skeg from ramp dragging, hidden underwater debris, and everyday wear on the water. It is also used to restore function to a skeg that has already been damaged or broken, since it can be installed with as little as 2 to 3 inches of the original skeg remaining. The SkegGuard is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish that conforms to the shape of the skeg, and it includes a drain hole on the bottom so water does not collect and cause corrosion or freezing.\u003c\/p\u003e\u003cp\u003eInstallation is designed to be straightforward: using a rubber mallet, the SkegGuard slides onto the existing skeg and is gently tapped until fully seated, then the pre-drilled holes are used to drill the skeg with a 1\/4 inch drill bit, all in about four steps and under 10 minutes. It features a 3mm lower wear tab for added protection at the point of contact. The Megaware Keelguard SkegGuard 27331 is fitted for Yamaha 30 and 60 HP 4-Stroke outboards (2002-Present) and Yamaha 40-50 HP 2 and 4-Stroke outboards (1997-Present). Yamaha High Thrust models use a different part number. The SkegGuard is backed by a 3-year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megaware Keelguard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 27331\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mirror-Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear Tab Thickness:\u003c\/strong\u003e 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Hole:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Remaining Skeg Length for Installation:\u003c\/strong\u003e 2 to 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Drill Bit Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha 30 \u0026amp; 60 HP 4-Stroke outboards, 2002-Present\u003c\/li\u003e\n\u003cli\u003eYamaha 40-50 HP 2 \u0026amp; 4-Stroke outboards, 1997-Present\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part; the Megaware Keelguard SkegGuard 27331 is sold under its own part number.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Megaware Keelguard SkegGuard 27331 fit?\u003c\/strong\u003e The SkegGuard 27331 fits Yamaha 30 and 60 HP 4-Stroke outboards from 2002-Present, and Yamaha 40-50 HP 2 and 4-Stroke outboards from 1997-Present. Yamaha High Thrust models require a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SkegGuard 27331 be installed if the skeg is already broken?\u003c\/strong\u003e Yes, the Megaware SkegGuard 27331 can be installed with as little as 2 to 3 inches of the original skeg remaining, which makes it a way to restore function to a damaged or broken skeg rather than replacing the entire lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SkegGuard 27331 made from?\u003c\/strong\u003e It is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish that conforms to the shape of the skeg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Megaware SkegGuard installed?\u003c\/strong\u003e Using a rubber mallet, the SkegGuard 27331 is slid onto the existing skeg and gently tapped until fully seated, then the pre-drilled holes are used to drill the skeg with a 1\/4 inch drill bit. The process takes about four steps and under 10 minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SkegGuard 27331 have a drain hole?\u003c\/strong\u003e Yes, it includes a drain hole on the bottom of the guard to prevent water from collecting, which helps avoid corrosion and freezing damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SkegGuard 27331 weigh?\u003c\/strong\u003e The Megaware Keelguard SkegGuard 27331 weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SkegGuard 27331 a genuine Megaware part or an aftermarket copy?\u003c\/strong\u003e The 27331 is a genuine Megaware Keelguard part, sold under its own manufacturer part number rather than as a copy of an OEM component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the SkegGuard 27331?\u003c\/strong\u003e The package includes one Megaware Keelguard SkegGuard 27331 skeg protector; no additional hardware is specified beyond the pre-drilled mounting holes on the guard itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the SkegGuard 27331?\u003c\/strong\u003e The Megaware SkegGuard 27331 comes with a 3-year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the SkegGuard 27331 have?\u003c\/strong\u003e It has a silver, mirror-polished stainless steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the SkegGuard 27331 and model 27321?\u003c\/strong\u003e The 27331 is designed for Yamaha 30 and 60 HP 4-Stroke (2002-Present) and 40-50 HP 2 and 4-Stroke (1997-Present) outboards, while model 27321 is the version for Yamaha High Thrust models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the SkegGuard 27331?\u003c\/strong\u003e It protects the skeg of a Yamaha outboard from ramp dragging, impacts with hidden underwater debris, and everyday wear, and it can also restore function to a skeg that is already damaged.\u003c\/p\u003e","brand":"Keel Guard","offers":[{"title":"Default Title","offer_id":49027496411355,"sku":"MKI-27331","price":125.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81GQJBoEL3L_b5729963-3161-4030-97d9-8138a69c709b.jpg?v=1785331037","url":"https:\/\/www.goodvibesmarina.com\/products\/megaware-keelguard-skegguard-27331-stainless-steel-skeg-protector-fits-yamaha-30-60hp-4-stroke-outboards","provider":"Good Vibes Marina","version":"1.0","type":"link"}