{"product_id":"michigan-wheel-11027-aluminum-3-blade-propeller-12-1-4-x-15-rh-fits-evinrude-johnson-omc-40-75-hp","title":"Michigan Wheel 11027 Michigan Match Aluminum 3-Blade Outboard Propeller, 11-1\/2 x 9 Right-Hand","description":"\u003cp\u003eThe Michigan Wheel 11027 is a Michigan Match aluminum outboard propeller built for trouble-free service and easy repairability. It is cast from a higher-grade aluminum alloy than many original equipment props, giving it added strength while keeping weight and cost reasonable for everyday boaters. The 3-blade design measures 11-1\/2 inches in diameter with a 9 inch pitch and is cut for right-hand rotation, the standard rotation used on most single-engine outboard installations. The blades feature a cupped profile, which helps hold the stern up, reduce ventilation in turns, and can allow for a slight increase in engine RPM depending on the boat and load.\u003c\/p\u003e\u003cp\u003eEvery Michigan Wheel prop, including the 11027, uses a rubber hub bonded inside the propeller body. This bonded rubber hub acts as a shock absorber, helping protect the propeller shaft, lower unit, and gear case from damage if the blades strike a submerged object. The 11027 is designed to be installed with Hub Kit 992402. The propeller is backed by a Limited Lifetime Manufacturer's Warranty and is cataloged in the Evinrude outboard propeller line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Michigan Match\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 11-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Design:\u003c\/strong\u003e Cupped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 992402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984005401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Category:\u003c\/strong\u003e Evinrude outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe 11027 is cataloged in the Evinrude outboard propeller line. Specific horsepower, model, and year fitment beyond this category are not published, so confirm shaft diameter and spline count against your outboard before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are published for the Michigan Wheel 11027.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Michigan Wheel 11027 propeller?\u003c\/strong\u003e The 11027 is 11-1\/2 inches in diameter with a 9 inch pitch, cut for right-hand rotation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Michigan Wheel 11027 made of?\u003c\/strong\u003e It is cast from a higher-grade aluminum alloy, which Michigan Wheel uses across its Michigan Match propeller line for added strength over many original equipment props.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many blades does this propeller have?\u003c\/strong\u003e The Michigan Wheel 11027 is a 3-blade propeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11027 left-hand or right-hand rotation?\u003c\/strong\u003e Right-hand (RH) rotation, which is the standard rotation for most single-engine outboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub kit is needed to install the 11027?\u003c\/strong\u003e Hub Kit 992402 is the hub kit specified for the Michigan Wheel 11027.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 11027 propeller weigh?\u003c\/strong\u003e 5.7 pounds is the shipping weight of the Michigan Wheel 11027.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the bonded rubber hub do?\u003c\/strong\u003e The rubber hub bonded inside the 11027 acts as a shock absorber, helping protect the propeller shaft, motor, and gear case if the blades hit a submerged object.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Michigan Wheel 11027 a cupped propeller?\u003c\/strong\u003e Yes, the 11027 has a cupped blade design, which can help hold the stern up and reduce ventilation in turns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the 11027?\u003c\/strong\u003e It is covered by a Limited Lifetime Manufacturer's Warranty from Michigan Wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines is the 11027 designed for?\u003c\/strong\u003e The Michigan Wheel 11027 is cataloged in the Evinrude outboard propeller line; confirm shaft diameter and spline count for your specific engine before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11027 a genuine Michigan Wheel part?\u003c\/strong\u003e Yes, the 11027 is a genuine Michigan Wheel Michigan Match propeller, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Michigan Wheel 11027?\u003c\/strong\u003e The UPC for the Michigan Wheel 11027 propeller is 014984005401.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991272567003,"sku":"MIW-011027","price":128.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Match-3-Blade__33746.1722376538.500.750.jpg?v=1785188208","url":"https:\/\/www.goodvibesmarina.com\/products\/michigan-wheel-11027-aluminum-3-blade-propeller-12-1-4-x-15-rh-fits-evinrude-johnson-omc-40-75-hp","provider":"Good Vibes Marina","version":"1.0","type":"link"}