{"product_id":"michigan-wheel-206-xhs-ii-propeller-hub-kit-evinrude-johnson-omc-cobra-sterndrive-v4-gearcase-13-tooth-spline","title":"Michigan Wheel 206 XHS II Hub Kit for OMC\/Cobra Model 400 Sterndrives, 13 Tooth Spline","description":"\u003cp\u003eThe Michigan Wheel 206 is an XHS II Xchangeable Hub Kit built for OMC\/Cobra Model 400 sterndrives with a 13 tooth spline gearcase. The kit uses a Delrin cushioned sleeve that absorbs the impact and stress created every time the drive shifts gears, and is designed to spin under significant impact so the lower unit is protected from shock loading rather than the gearcase itself. It is built for use with Vortex and Apollo prop housings, and the hub design is interchangeable with Mercury's Flo-Torq II hub system, which makes it a practical choice for boaters running mixed prop inventories or keeping a spare on board.\u003c\/p\u003e\u003cp\u003eAs an exchangeable hub system, the 206 lets the same prop housing be reused across compatible gearcases by swapping in the correct hub kit for the spline count and drive, rather than requiring a completely different propeller. This keeps replacement costs down when a hub wears out or needs to be matched to a different sterndrive. The kit ships as a complete, ready-to-install hub assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michigan Wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e XHS II Hub Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin cushioned sleeve; rubber components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 5.5 inches x 2.75 inches x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline Count:\u003c\/strong\u003e 13 Tooth Spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Prop Housings:\u003c\/strong\u003e Vortex, Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub System Interchange:\u003c\/strong\u003e Interchangeable with Mercury Flo-Torq II hub system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014984016391\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC\/Cobra Model 400 Sterndrives, 13 Tooth Spline gearcase\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gearcase does the Michigan Wheel 206 hub kit fit?\u003c\/strong\u003e The Michigan Wheel 206 is built for OMC\/Cobra Model 400 sterndrives with a 13 tooth spline gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat prop housings work with this hub kit?\u003c\/strong\u003e The 206 hub kit is designed for use with Vortex and Apollo prop housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 206 hub kit compatible with Mercury propellers?\u003c\/strong\u003e Yes, the hub design is interchangeable with Mercury's Flo-Torq II hub system, so it can be used as an alternative in that hub family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Michigan Wheel 206 hub made from?\u003c\/strong\u003e It uses a Delrin cushioned sleeve along with rubber components to absorb shifting impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 206 hub kit weigh?\u003c\/strong\u003e The Michigan Wheel 206 XHS II Hub Kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the hub kit?\u003c\/strong\u003e The 206 measures 5.5 inches deep by 2.75 inches wide by 2.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the hub need to absorb impact?\u003c\/strong\u003e The Delrin cushioned sleeve in the 206 hub kit spins under significant impact during gear shifts, protecting the lower unit from shock loads that would otherwise transfer directly into the gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete hub kit or just a bushing?\u003c\/strong\u003e The Michigan Wheel 206 is sold as a complete exchangeable hub kit, not just an individual bushing component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 206 hub kit come with a warranty?\u003c\/strong\u003e Michigan Wheel covers the 206 hub kit's bushing components with a 1-year limited warranty against defects in material or workmanship from the date of purchase, with proof of purchase required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline count does part number 206 use?\u003c\/strong\u003e Part number 206 is specified with a 13 tooth spline for OMC\/Cobra Model 400 sterndrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this hub kit be swapped between different props?\u003c\/strong\u003e Yes, as an exchangeable hub system, the 206 hub allows the same prop housing to be reused by swapping in the correct hub kit for the gearcase it needs to match.\u003c\/p\u003e","brand":"Michigan Wheel","offers":[{"title":"Default Title","offer_id":48991274074331,"sku":"MIW-206","price":55.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Michigan-Wheel-Hub-Kit__04025.1722498419.500.750.jpg?v=1785188411","url":"https:\/\/www.goodvibesmarina.com\/products\/michigan-wheel-206-xhs-ii-propeller-hub-kit-evinrude-johnson-omc-cobra-sterndrive-v4-gearcase-13-tooth-spline","provider":"Good Vibes Marina","version":"1.0","type":"link"}