{"product_id":"moeller-033210-10-straight-brass-bulkhead-fitting-3-8-inch-npt-marine-fuel-tank-fitting","title":"Moeller Brass Bulkhead Fitting, Straight 3\/8 Inch NPT Barb Connector","description":"\u003cp\u003eThis Moeller brass bulkhead fitting is a straight, 3\/8 inch fuel line connector designed to pass fuel line through a bulkhead or tank wall while maintaining a secure, leak-resistant seal. Built from solid brass with a brass exterior finish, the fitting resists corrosion in the marine fuel system environment and holds up to repeated hose connections over time. The barb-style connector end accepts 3\/8 inch fuel hose, while the threaded side uses a 0.375 inch NPT thread for a tight, sealed installation into a bulkhead, tank fitting, or fuel line junction.\u003c\/p\u003e\u003cp\u003eThis fitting is a single-piece component intended for use in boat fuel systems where a fuel line needs to pass through a bulkhead, transom, or tank wall. It is commonly used when running or replacing fuel lines on boats equipped with portable or built-in fuel tanks. The compact, straight design keeps the fuel line routing simple and minimizes strain on the hose at the pass-through point. As a Moeller product, it is built to the same fuel system design and construction standards the brand is known for in marine fuel components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 033210-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Brass Bulkhead Fitting, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 0.375 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.5 inches x 2 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fuel line does the Moeller 033210-10 bulkhead fitting fit?\u003c\/strong\u003e It is sized for 3\/8 inch fuel hose on the barb connector end, matching the fitting's 3\/8 inch straight design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting straight or angled?\u003c\/strong\u003e The Moeller 033210-10 is a straight bulkhead fitting, not an angled version, so the hose runs directly through the pass-through point without a bend at the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the fitting made of?\u003c\/strong\u003e Brass, both in construction and exterior finish, which resists corrosion in a marine fuel system environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type and size does this fitting use?\u003c\/strong\u003e The threaded side uses a 0.375 inch NPT thread, allowing it to seal into a tapped bulkhead, tank fitting, or fuel line junction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fittings come in the package?\u003c\/strong\u003e One Moeller 033210-10 brass bulkhead fitting is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fitting weigh?\u003c\/strong\u003e 0.14 pounds, making it a lightweight component to add to a fuel line installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the fitting?\u003c\/strong\u003e The 033210-10 measures 5.5 inches by 2 inches by 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting used for?\u003c\/strong\u003e It is used to pass fuel line through a bulkhead, transom, or tank wall in a boat fuel system while maintaining a sealed connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the connector end barbed or threaded for hose attachment?\u003c\/strong\u003e The hose side of the 033210-10 uses a barb connector, designed to grip 3\/8 inch fuel hose securely, typically with a hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Moeller part?\u003c\/strong\u003e Yes, the 033210-10 is a genuine Moeller brass bulkhead fitting, not a generic or third-party equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used for fuel systems other than boats?\u003c\/strong\u003e It is designed and marketed as a marine fuel system component, specifically for boat fuel line bulkhead pass-throughs.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991087165659,"sku":"MOE-033210-10","price":15.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/033210-10__05550.1722480069.500.750.jpg?v=1785188191","url":"https:\/\/www.goodvibesmarina.com\/products\/moeller-033210-10-straight-brass-bulkhead-fitting-3-8-inch-npt-marine-fuel-tank-fitting","provider":"Good Vibes Marina","version":"1.0","type":"link"}