{"product_id":"moeller-099081-00-adjustable-inboard-motor-flusher-telescoping-31-engine-muffs-no-tools-12-gpm","title":"Moeller 099081-00 Adjustable Inboard Engine Motor Flusher, Telescoping, Stainless Steel T-Fitting","description":"\u003cp\u003eThe Moeller Adjustable Inboard Engine Motor Flusher (099081-00) is a telescoping flushing tool designed to connect a garden hose to an inboard engine's raw water intake for flushing and cleaning after use. The unit uses a stainless steel T fitting that slides into the intake slot in either direction, allowing a quick fit without needing to worry about orientation. Installation and removal require no tools: the telescoping design lets the flusher adjust and install in minutes, making it a convenient accessory to keep on board or in the shop. A large cup at the flushing end helps prevent the unit from falling off the intake or from blowing water by during use, keeping the flush water directed where it needs to go instead of spraying the engine compartment. With a 31 inch total length, the telescoping flusher can extend to reach intake slots at varying depths on inboard engine installations. This is a straightforward, reusable tool intended for boat owners and marine technicians who need to regularly flush inboard engine cooling systems with fresh water to remove salt, sand, and debris.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099081-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Adjustable Inboard Engine Motor Flusher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 12 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools Required:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729081006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Moeller 099081-00 motor flusher used for?\u003c\/strong\u003e The Moeller 099081-00 is an adjustable inboard engine motor flusher used to connect a garden hose to an inboard engine's raw water intake so the cooling system can be flushed with fresh water after use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 099081-00 flusher fit both sides of the intake?\u003c\/strong\u003e Yes, the stainless steel T fitting on the Moeller 099081-00 slides into the intake slot in either direction, so it is not restricted to a single orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre tools required to install the Moeller inboard engine flusher?\u003c\/strong\u003e No tools are required. The Moeller 099081-00 has a telescoping design that installs in minutes by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Moeller 099081-00 motor flusher?\u003c\/strong\u003e 31 inches is the total length of the Moeller 099081-00 adjustable inboard engine motor flusher when extended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the T fitting made of?\u003c\/strong\u003e The T fitting on the Moeller 099081-00 that slides into the intake slot is made of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the flusher fall off or spray water while in use?\u003c\/strong\u003e The Moeller 099081-00 has a large cup design at the flushing end that is built to prevent the unit from falling off the intake or from blowing water by during a flush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum flow rate through the Moeller motor flusher?\u003c\/strong\u003e 12 gallons per minute is the maximum flow rate rating for the Moeller 099081-00 adjustable inboard engine motor flusher.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 099081-00 weigh?\u003c\/strong\u003e The Moeller 099081-00 adjustable inboard engine motor flusher weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 099081-00 adjustable in length?\u003c\/strong\u003e Yes, it is a telescoping unit, which is why it is named the Adjustable Inboard Engine Motor Flusher, allowing it to extend to reach intake slots at varying depths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 099081-00 and the 099076-00 Moeller flusher?\u003c\/strong\u003e The 099081-00 is the telescoping Adjustable Inboard Engine Motor Flusher with a stainless steel T fitting, while the 099076-00 is a separate Universal Round Cup Motor Flusher, a different design and part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Moeller 099081-00?\u003c\/strong\u003e The Moeller 099081-00 ships as a single adjustable inboard engine motor flusher unit with the stainless steel T fitting and large cup assembled.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991101485275,"sku":"MOE-099081-00","price":23.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEM-380190_lg__19938.1558116940.500.750.jpg?v=1785188189","url":"https:\/\/www.goodvibesmarina.com\/products\/moeller-099081-00-adjustable-inboard-motor-flusher-telescoping-31-engine-muffs-no-tools-12-gpm","provider":"Good Vibes Marina","version":"1.0","type":"link"}