{"product_id":"moeller-marine-035340-fluid-extractor-7-0-liter-7-2-quart-manual-dual-action-oil-change-pump","title":"Moeller Marine 7.0 Liter \/ 7.2 Quart Fluid Extractor Oil Change Pump, Model 035340","description":"\u003cp\u003eThe Moeller 7.0 Liter Fluid Extractor (035340) is a manual, dual action vacuum pump designed to remove oil from an engine's crankcase without the mess of a traditional drain-and-catch setup. The dual action design pumps fluid on both the upstroke and downstroke, so it clears the sump faster than single-action extractors, and it works equally well on warm or cold oil. Because it operates entirely by hand, there is no need for electric power or a compressed air source, making it a convenient option for boats, garages, or anywhere shop air isn't available.\u003c\/p\u003e\u003cp\u003eAn automatic shut-off float inside the reservoir stops fluid intake once the tank reaches capacity, preventing overflow. A manual pressure relief valve lets you release built-up vacuum in a controlled way, so removing the fill hose after extraction stays gulp-free and mess-free. The extractor holds 7.2 quarts (7.0 liters) of used oil, giving it enough capacity for a full oil change on most inboard and I\/O marine engines and many automotive engines in one pass. Moeller offers this Fluid Extractor line in two sizes, 5 liter and 7 liter, so buyers can match the tank to the volume of oil their engine holds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035340\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7.2 Quarts \/ 7.0 Liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.5 in. L x 14.9 in. W x 18.03 in. H (241 mm L x 379 mm W x 458 mm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Manual, no electric or air power required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Action:\u003c\/strong\u003e Dual action (upstroke and downstroke)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Automatic shut-off float, manual pressure relief valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Type:\u003c\/strong\u003e Cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729012963\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much oil does the Moeller 035340 Fluid Extractor hold?\u003c\/strong\u003e The Moeller 035340 Fluid Extractor holds 7.2 quarts (7.0 liters), enough capacity for a full oil change on most engines in a single pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this extractor need electricity or an air compressor to run?\u003c\/strong\u003e No. The 035340 is a fully manual, dual action vacuum pump that requires no electric power or compressed air to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the Moeller Fluid Extractor to pump gasoline?\u003c\/strong\u003e The dossier for the Moeller 035340 does not list gasoline as an approved fluid, so it should only be used for its intended purpose of extracting engine oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stops the tank from overflowing during extraction?\u003c\/strong\u003e An automatic shut-off float built into the 035340 Fluid Extractor stops fluid intake once the tank reaches capacity, preventing overflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I release the vacuum after pumping oil out?\u003c\/strong\u003e A manual pressure relief valve on the 035340 lets you release built-up vacuum before removing the fill hose, so the process stays gulp-free and mess-free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the dual action pump work faster than a single-action extractor?\u003c\/strong\u003e Yes, the Moeller 035340 uses a dual action design that draws fluid on both the upstroke and downstroke, moving oil out faster than a single-action pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this extractor pump cold oil, or does the oil need to be warm first?\u003c\/strong\u003e The 035340 Fluid Extractor is designed to extract both warm and cold oil, so a pre-warm-up is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Moeller 035340 unit?\u003c\/strong\u003e The 035340 Fluid Extractor measures 9.5 in. L x 14.9 in. W x 18.03 in. H (241 mm x 379 mm x 458 mm).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Moeller 7.0 Liter Fluid Extractor weigh?\u003c\/strong\u003e The Moeller 035340 Fluid Extractor weighs 5.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Moeller make this Fluid Extractor in a different size?\u003c\/strong\u003e Yes, the Fluid Extractor line is available in two sizes, 5 liter and 7 liter; the 035340 is the 7.2 quart \/ 7.0 liter version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Moeller 035340 Fluid Extractor?\u003c\/strong\u003e The 035340 Fluid Extractor is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Moeller 035340 a genuine Moeller product?\u003c\/strong\u003e Yes, the 035340 is a genuine Moeller Marine part, identified by its Moeller manufacturer part number 035340.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991089656027,"sku":"MOE-035340","price":142.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81-F71XXM3L.jpg?v=1784491227","url":"https:\/\/www.goodvibesmarina.com\/products\/moeller-marine-035340-fluid-extractor-7-0-liter-7-2-quart-manual-dual-action-oil-change-pump","provider":"Good Vibes Marina","version":"1.0","type":"link"}