{"product_id":"moeller-marine-1-in-brass-snap-tite-livewell-and-bailer-drain-plug-029000-11","title":"Moeller 1 Inch Brass Snap-Tite Boat Drain Plug, Clam Sell Packaging (029000-10)","description":"\u003cp\u003eThe Moeller 029000-10 is a 1 inch Brass Snap-Tite boat drain plug designed to seal the transom drain hole on boats when the vessel is in the water, and to be removed for draining when the boat is on a trailer or in storage. The snap-tite style plug uses a compressible rubber body that expands to lock into the drain tube for a watertight seal without threading or tools. Brass construction resists corrosion in both freshwater and saltwater environments, making it a durable choice for regular use season after season.\u003c\/p\u003e\u003cp\u003eThis 1 inch plug measures 0.875 inches in diameter in its relaxed state and expands to 1 inch in diameter when compressed into the drain tube, allowing it to snap securely into place. It is sold in clam sell packaging for retail display and single-unit purchase. This drain plug is a straightforward, functional replacement or spare for boat owners who need to keep an extra plug on hand or replace a worn or damaged one.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Moeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 029000-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clam Sell Packaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (Compressed):\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Diameter (Relaxed):\u003c\/strong\u003e 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739729290101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Drain Plug\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drain hole does the Moeller 029000-10 fit?\u003c\/strong\u003e The Moeller 029000-10 is a 1 inch Brass Snap-Tite plug, measuring 0.875 inches in diameter when relaxed and expanding to 1 inch in diameter once compressed into the drain tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 029000-10 plug made of brass or aluminum?\u003c\/strong\u003e This particular Moeller plug, part number 029000-10, is made of brass. Moeller also offers an aluminum version of the same 1 inch Snap-Tite plug under a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a Snap-Tite drain plug work?\u003c\/strong\u003e A Snap-Tite plug is a compressible rubber-bodied plug that is squeezed and pushed into the transom drain tube, then expands to snap into place and form a watertight seal without any threading or tools required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install the 029000-10 drain plug?\u003c\/strong\u003e No tools are needed. The Moeller 029000-10 Snap-Tite plug is installed by hand, compressing the plug body and snapping it into the drain tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Moeller 029000-10 packaged?\u003c\/strong\u003e It comes in clam sell packaging, meaning it is sold as a single plug in retail blister-style packaging rather than in bulk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 029000-10 drain plug weigh?\u003c\/strong\u003e The Moeller 029000-10 Brass Snap-Tite drain plug weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Moeller drain plug?\u003c\/strong\u003e The UPC for the Moeller 029000-10 1 inch Brass Snap-Tite drain plug is 739729290101.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I remove my boat's drain plug?\u003c\/strong\u003e The drain plug, such as the Moeller 029000-10, should be removed whenever the boat is out of the water, such as on a trailer or in storage, to allow the bilge to drain and prevent water and rainwater buildup or freeze damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs brass better than aluminum for a boat drain plug?\u003c\/strong\u003e Brass, used in the Moeller 029000-10, is a corrosion-resistant metal well suited to both freshwater and saltwater use, while Moeller's aluminum Snap-Tite plug is a lighter-weight alternative in the same 1 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 029000-10 plug be reused?\u003c\/strong\u003e Yes, the Moeller 029000-10 Snap-Tite plug is designed to be snapped in and pulled out repeatedly for draining and re-sealing the transom drain hole each boating season.\u003c\/p\u003e","brand":"Moeller Marine","offers":[{"title":"Default Title","offer_id":48991235277019,"sku":"MOE-029000-10","price":10.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_d1d835d9-a91f-4ba4-9a58-20262d6107e2.jpg?v=1785332785","url":"https:\/\/www.goodvibesmarina.com\/products\/moeller-marine-1-in-brass-snap-tite-livewell-and-bailer-drain-plug-029000-11","provider":"Good Vibes Marina","version":"1.0","type":"link"}