{"product_id":"pela-2000-marine-oil-change-pump-2-5-liter-capacity-pl-2000","title":"Pela 2000 Marine Oil Change Pump, 2.5 Liter Capacity, PL-2000","description":"\u003cp\u003eThe Pela 2000 is a compact marine oil change pump built for small engines. It creates a powerful vacuum with just 5 to 10 pumps, letting you extract used oil directly through the dipstick tube without draining from below the engine. This makes it well suited for small 4-stroke outboard engines up to 50 HP, sailboats with small diesel engines from 9 HP to 18 HP, and PWCs with 4-stroke engines.\u003c\/p\u003e\u003cp\u003eThe unit has a 2.5 liter (2.64 qt) capacity, sized for the smaller oil volumes found in these applications. Oil is drawn up through a 3\/16 inch OD probe tube (43 inches long) into a 3\/8 inch OD clear section tube (39 inches long), then collects in the container so you can monitor extraction as it happens. No special cleaning is required after use; simply empty as much oil as possible from the unit and bring the used oil to a recycling depot. The pump is not intended for use with gasoline or other flammables.\u003c\/p\u003e\u003cp\u003eTo use the Pela 2000, warm the engine to help suspend contaminants in the oil, remove the dipstick, insert the probe tube down to the bottom of the oil pan, attach the pump, and pump 5 to 10 times to start automatic extraction. Pulling the tube out of the fluid stops extraction at any time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pela\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PL-2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2.5 Liters (2.64 Qts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (Assembled):\u003c\/strong\u003e 17.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Diameter:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tube:\u003c\/strong\u003e 3\/16 inch OD, Length 43 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Section Tube:\u003c\/strong\u003e 3\/8 inch OD, Length 39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 4713176300237\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended For:\u003c\/strong\u003e Small 4-stroke outboard engines up to 50 HP, sailboats with small diesel engines (9 HP to 18 HP), PWCs with 4-stroke engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many pumps does it take to change oil with the Pela 2000?\u003c\/strong\u003e The Pela 2000 (PL-2000) creates a powerful vacuum with just 5 to 10 pumps of the handle, after which oil is extracted automatically without continuous pumping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size engines is the Pela 2000 designed for?\u003c\/strong\u003e It is designed for small 4-stroke outboard engines up to 50 HP, sailboats with small diesel engines from 9 HP to 18 HP, and PWCs with 4-stroke engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much oil does the Pela 2000 hold?\u003c\/strong\u003e The PL-2000 has a capacity of 2.5 liters, equal to 2.64 quarts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Pela 2000 oil change pump?\u003c\/strong\u003e Assembled, the PL-2000 stands 17.5 inches tall with a 7 inch container diameter. The probe tube is 3\/16 inch OD and 43 inches long, and the clear section tube is 3\/8 inch OD and 39 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Pela 2000 weigh?\u003c\/strong\u003e The Pela 2000 marine oil change pump (PL-2000) weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Pela 2000 be used with gasoline?\u003c\/strong\u003e No. The Pela 2000 is not for use with gasoline or other flammables; it is intended for extracting engine oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I use the Pela 2000 to change my engine oil?\u003c\/strong\u003e Warm the engine, remove the dipstick, insert the probe tube of the PL-2000 down to the bottom of the oil pan, attach the pump to the container, and pump 5 to 10 times to start automatic vacuum extraction. Pull the tube from the fluid to stop extraction at any time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Pela 2000 require cleaning after use?\u003c\/strong\u003e No special cleaning is required. Simply empty as much oil as possible from the PL-2000 unit and bring the used oil to a recycling depot; the unit should not be used for long-term oil storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Pela 2000 suitable for sailboats?\u003c\/strong\u003e Yes, the PL-2000 is ideal for sailboats with small diesel engines in the 9 HP to 18 HP range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Pela 2000 and larger Pela oil extractors?\u003c\/strong\u003e The Pela 2000 (PL-2000) has a 2.5 liter capacity and needs only 5 to 10 pumps, making it suited to smaller engines up to 50 HP, while larger Pela models such as the 6000 and 650 hold more oil and are built for bigger or twin-engine applications.\u003c\/p\u003e","brand":"Pela Oil Changers","offers":[{"title":"Default Title","offer_id":49028241883355,"sku":"PEL-PL-2000","price":71.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PEL-PL-2000_lg__08936.1567705373.500.750.jpg?v=1785165332","url":"https:\/\/www.goodvibesmarina.com\/products\/pela-2000-marine-oil-change-pump-2-5-liter-capacity-pl-2000","provider":"Good Vibes Marina","version":"1.0","type":"link"}