{"product_id":"perko-1223dp0chr-skene-bow-chocks-chrome-plated-matched-port-starboard-pair-for-rope-up-to-1-2-inch","title":"Perko 1223DP0CHR Skene Bow Chocks, Chrome Plated, 3-1\/2 Inch, Sold in Pairs","description":"\u003cp\u003eThe Perko 1223DP0CHR Skene Bow Chocks are a matched pair of deck hardware fittings designed to guide and secure mooring or dock lines as they run over the edge of a boat's deck or bow. Each chock is built from zinc alloy with a chrome plated finish, giving it a bright, corrosion-resistant surface that holds up to marine exposure while blending in with other polished deck hardware. The smooth, curved horn shape reduces chafing and wear on rope as the boat shifts at the dock or mooring, helping lines last longer and run more smoothly under load. This chock is sized for rope up to 1\/2 inch in diameter, with an overall length of 3-1\/2 inches and a width of 7\/8 inch, making it a compact fit for smaller cleats, bow rails, and gunwale mounting points. It mounts with #8 screws (sold separately), keeping installation straightforward with a drill and screwdriver. The Perko 1223DP0CHR is sold as a matched port and starboard pair, so a single order outfits both sides of the bow or deck with a consistent look and equal wear characteristics on each side.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Perko\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1223DP0CHR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Skene Bow Chocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rope Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall:\u003c\/strong\u003e 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Size:\u003c\/strong\u003e #8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (Port and Starboard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 085226376634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Perko 1223DP0CHR?\u003c\/strong\u003e The Perko 1223DP0CHR ships as a matched pair of Skene bow chocks, one for the port side and one for the starboard side, so a single order outfits both sides of the bow or deck. Mounting screws are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does this chock accommodate?\u003c\/strong\u003e The Perko 1223DP0CHR is rated for rope up to 1\/2 inch in diameter, which covers most standard dock and mooring lines used on smaller to mid-size boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Perko 1223DP0CHR bow chock?\u003c\/strong\u003e Each chock measures 3-1\/2 inches in overall length and 7\/8 inch in width, making it a compact fit suited to smaller mounting areas on the bow or gunwale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Perko 1223DP0CHR made from?\u003c\/strong\u003e This bow chock is made from zinc alloy with a chrome plated finish, giving it a bright, corrosion-resistant surface for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Perko 1223DP0CHR weigh?\u003c\/strong\u003e The pair of Skene bow chocks weighs 0.3 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are needed to install the Perko 1223DP0CHR?\u003c\/strong\u003e The chocks mount using #8 screws, which are sold separately and not included with the 1223DP0CHR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Perko 1223DP0CHR easy to install?\u003c\/strong\u003e Yes, the Skene bow chocks mount with a simple screw-in installation using #8 screws, requiring only a drill and screwdriver to fasten each chock in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the chrome finish on the Perko 1223DP0CHR resist corrosion?\u003c\/strong\u003e The chrome plated finish over the zinc alloy body is designed to resist corrosion in marine environments while keeping a polished appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order just one Perko 1223DP0CHR chock instead of a pair?\u003c\/strong\u003e No, the 1223DP0CHR is sold only as a matched port and starboard pair, not as an individual chock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a Skene-style bow chock like the Perko 1223DP0CHR?\u003c\/strong\u003e A Skene bow chock guides mooring or dock lines over the edge of the deck while reducing chafing and unwanted movement of the rope, helping protect the line from wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Perko 1223DP0CHR match other chrome plated Perko deck hardware?\u003c\/strong\u003e Yes, the chrome plated finish on the 1223DP0CHR is designed to coordinate with other chrome plated Perko deck and cabinet hardware for a consistent look.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":48991120851163,"sku":"PKO-1223DPCHR","price":15.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PKO-1223DPCHR_lg__39461.1558117692.500.750.jpg?v=1785188998","url":"https:\/\/www.goodvibesmarina.com\/products\/perko-1223dp0chr-skene-bow-chocks-chrome-plated-matched-port-starboard-pair-for-rope-up-to-1-2-inch","provider":"Good Vibes Marina","version":"1.0","type":"link"}