{"product_id":"pettit-11402020-two-part-epoxy-barrier-coat-primer-for-antifouling-paint-prep","title":"Pettit Paint Strainers for Marine Coatings and Antifouling Paint","description":"\u003cp\u003ePettit Paint Strainers are used to filter marine paints, epoxy coatings, and antifouling bottom paint before application, removing lumps, skin, and debris so the finished coat goes on smooth. Straining paint prior to rolling or spraying is a standard step recommended for achieving an even film build with Pettit coatings and helps prevent clogged rollers, brushes, and spray equipment. Keeping paint free of particulates is especially important with two-part epoxy systems and antifouling paints, where a clean, consistent film thickness affects both appearance and performance.\u003c\/p\u003e\u003cp\u003eThese strainers are part of Pettit's painting supplies line, intended to be used alongside Pettit primers, epoxy barrier coats, and antifouling paints as part of a complete application process. Boat owners and professional applicators use paint strainers as routine prep before every coat to reduce the chance of debris being rolled or sprayed onto the hull.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11402020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Painting Supplies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469029194\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are Pettit Paint Strainers used for?\u003c\/strong\u003e Pettit Paint Strainers (part number 11402020) are used to filter marine paint and coatings before application, removing lumps and debris so the paint applies smoothly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these strainers be used with epoxy barrier coats?\u003c\/strong\u003e Yes, straining is a recommended step before applying epoxy barrier coats and other Pettit coatings to ensure an even, debris-free film.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre Pettit Paint Strainers made for antifouling paint too?\u003c\/strong\u003e Yes, part number 11402020 is intended for use with antifouling paint as well as other Pettit marine coatings during application prep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a set of Pettit Paint Strainers weigh?\u003c\/strong\u003e The Pettit Paint Strainers, part number 11402020, weigh 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Pettit Paint Strainers (part number 11402020) is 725469029194.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy should paint be strained before application?\u003c\/strong\u003e Straining removes lumps, skin, and debris from paint so it applies in a smooth, even film and does not clog rollers, brushes, or spray equipment; this is the purpose of the Pettit Paint Strainers, part 11402020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is this?\u003c\/strong\u003e Part number 11402020 is listed under Pettit's Painting Supplies category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Pettit product?\u003c\/strong\u003e Yes, part number 11402020 is a genuine Pettit painting supply item, not a generic or third-party substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen during the painting process should I use a paint strainer?\u003c\/strong\u003e Paint should be strained with the Pettit Paint Strainer (11402020) before each coat is applied, as part of standard prep alongside mixing and thinning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a new strainer for each coat of paint?\u003c\/strong\u003e Using a fresh Pettit Paint Strainer for each batch of paint you prepare helps ensure debris from a previous strain isn't reintroduced into a new coat.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991655657691,"sku":"PET-14020","price":108.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/pet-14020_lg__18426.1558115671.500.750.jpg?v=1785329138","url":"https:\/\/www.goodvibesmarina.com\/products\/pettit-11402020-two-part-epoxy-barrier-coat-primer-for-antifouling-paint-prep","provider":"Good Vibes Marina","version":"1.0","type":"link"}