{"product_id":"pettit-epoxy-thinner-quart-solvent-for-epoxy-barrier-coats-and-primers-mpn-11209708","title":"Pettit Epoxy Thinner, Quart - Part 11209708 for Pettit Protect Two-Part Epoxy Systems","description":"\u003cp\u003ePettit Epoxy Thinner (Part 11209708) is a quart-size thinner formulated for use within the Pettit two-part epoxy coating system, including Pettit Protect topcoat, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, and Pettit 7050 EZ-Fair Epoxy Fairing Compound. It is intended for boat owners and professional applicators preparing and recoating keels and hulls with Pettit's epoxy products, helping maintain proper application consistency across primer, fairing, and topcoat stages.\u003c\/p\u003e\u003cp\u003eThe Pettit epoxy system this thinner supports covers multiple substrates. On lead keels, the surface is disc sanded or abraded to bright metal, coated with one thin coat of 6455\/044 Metal Primer, allowed to dry eight hours, then topcoated with Pettit Protect; if fairing is needed, Pettit 7050 EZ-Fair Epoxy Fairing Compound is applied, sanded with 80 grit sandpaper, and followed by two additional coats of Pettit Protect. On steel or cast iron keels, the surface is abraded to bright metal, coated with one coat of 6980 Rustlok Steel Primer (recoat window of only 1\/2 to 2 hours), then topcoated with Pettit Protect, with the same EZ-Fair and finish-coat sequence if fairing is required. Pettit Protect can also be applied over existing two-part epoxy finishes in sound condition after brush-off sandblasting or heavy 60 grit sanding, followed by three coats of Pettit Protect. This quart of thinner supports those application steps within the Pettit epoxy system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11209708\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Epoxy Thinner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Quart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Thinners \u0026amp; Solvents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469001398\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Pettit Protect, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, Pettit 7050 EZ-Fair Epoxy Fairing Compound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit Epoxy Thinner (Part 11209708) used for?\u003c\/strong\u003e It is a thinner formulated for use within the Pettit two-part epoxy coating system, supporting application of Pettit Protect topcoat, Pettit 6455\/044 Metal Primer, Pettit 6980 Rustlok Steel Primer, and Pettit 7050 EZ-Fair Epoxy Fairing Compound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does Pettit Epoxy Thinner 11209708 come in?\u003c\/strong\u003e This product is sold in a one quart container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of Pettit Epoxy Thinner weigh?\u003c\/strong\u003e A quart of Pettit Epoxy Thinner, part 11209708, weighs 2.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this thinner be used on lead keels?\u003c\/strong\u003e Yes. In the Pettit lead keel process, the surface is disc sanded to bright metal, coated with 6455\/044 Metal Primer, and then topcoated with Pettit Protect, with this epoxy thinner supporting that application process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this thinner be used on steel or cast iron keels?\u003c\/strong\u003e Yes. For steel or cast iron keels, the surface is abraded to bright metal and coated with 6980 Rustlok Steel Primer before topcoating with Pettit Protect, and this thinner supports that Pettit epoxy application process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Pettit Epoxy Thinner compatible with Pettit Protect?\u003c\/strong\u003e Yes, Pettit Epoxy Thinner part 11209708 is intended for use with Pettit Protect, the two-part epoxy topcoat in the Pettit system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply this over an existing two-part epoxy finish?\u003c\/strong\u003e Pettit Protect may be applied over existing two-part epoxy finishes that are in sound condition, after brush-off sandblasting or heavy 60 grit sanding, and this thinner supports that recoat process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I wait before recoating Rustlok Steel Primer with Pettit Protect?\u003c\/strong\u003e The recoat window for 6980 Rustlok Steel Primer before applying Pettit Protect is only 1\/2 to 2 hours, no more and no less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does part 11209708 fall under?\u003c\/strong\u003e Pettit part 11209708, Epoxy Thinner, is categorized under Thinners \u0026amp; Solvents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fairing compound part of this same Pettit epoxy system?\u003c\/strong\u003e Yes, Pettit 7050 EZ-Fair Epoxy Fairing Compound is used within the same system as this thinner, applied and sanded smooth with 80 grit sandpaper before additional coats of Pettit Protect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Pettit Epoxy Thinner, Quart?\u003c\/strong\u003e The UPC for this quart of Pettit Epoxy Thinner, part 11209708, is 725469001398.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991651201243,"sku":"PET-97Q","price":41.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p_f90d2de7-424e-4ed5-8ecd-86e26f6661a0.jpg?v=1785347204","url":"https:\/\/www.goodvibesmarina.com\/products\/pettit-epoxy-thinner-quart-solvent-for-epoxy-barrier-coats-and-primers-mpn-11209708","provider":"Good Vibes Marina","version":"1.0","type":"link"}