{"product_id":"pettit-ez-fair-7050-epoxy-fairing-compound-quart","title":"Pettit EZ-Fair 7050 Epoxy Fairing Compound, Quart","description":"\u003cp\u003ePettit EZ-Fair 7050 is a lightweight, two-part epoxy putty engineered for fairing and smoothing surface imperfections both above and below the waterline. It is formulated for leveling uneven surfaces and filling gouges, scratches, and other surface damage on fiberglass, wood, or metal hulls. Because it is chemical and water resistant, EZ-Fair is a common choice for repairing blistered gelcoat and restoring a smooth, fair surface before painting.\u003c\/p\u003e\u003cp\u003eThe compound is waterproof once cured, and it is non-sagging and non-shrinking, which helps it hold its shape on vertical and overhead surfaces without slumping. It sands to a smooth finish and can be easily painted over once cured. Its fast-cure formula allows for quicker recoating compared to slower epoxy fillers, which helps keep a fairing or refinishing project moving.\u003c\/p\u003e\u003cp\u003eEZ-Fair 7050 also plays a role in Pettit's recommended coating systems for lead, steel, and cast iron keels. After priming bare metal and applying Pettit Protect, EZ-Fair 7050 can be used to fair the surface where needed, then sanded smooth with 80 grit sandpaper before finish coats of Pettit Protect are applied. This quart size supplies enough compound for spot repairs and moderate fairing work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 705008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Epoxy Fairing Compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 1 quart (32 fluid ounces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Gel\/putty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Metal, fiberglass, wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two-part epoxy putty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Pettit EZ-Fair 7050 used for?\u003c\/strong\u003e It is a two-part epoxy fairing compound used to fill and smooth surface imperfections above and below the waterline, including gouges, scratches, and blistered gelcoat on fiberglass, wood, or metal hulls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Fair 7050 waterproof once it cures?\u003c\/strong\u003e Yes, Pettit EZ-Fair 7050 is waterproof once fully cured, which is why it is suitable for use both above and below the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of EZ-Fair 7050 cover?\u003c\/strong\u003e This quart size contains 32 fluid ounces of the two-part epoxy putty, enough for spot fairing repairs and moderate surface leveling work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Fair 7050 be used on a metal keel?\u003c\/strong\u003e Yes, in Pettit's keel coating system, EZ-Fair 7050 is applied over a primed and coated lead, steel, or cast iron keel where fairing is needed, then sanded smooth with 80 grit sandpaper before final coats are applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes EZ-Fair 7050 shrink or sag while curing?\u003c\/strong\u003e No, EZ-Fair 7050 is formulated to be non-sagging and non-shrinking, which helps it hold its shape on vertical or overhead surfaces during cure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Pettit EZ-Fair 7050 be painted over?\u003c\/strong\u003e Yes, once cured and sanded smooth, EZ-Fair 7050 can be easily painted, making it suitable as a fairing step before applying primer and finish coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is EZ-Fair 7050 recommended for?\u003c\/strong\u003e Pettit EZ-Fair 7050 is recommended for use on metal, fiberglass, and wood surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does EZ-Fair 7050 take to fully cure?\u003c\/strong\u003e EZ-Fair 7050 has a full cure time of 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Fair 7050 a one-part or two-part product?\u003c\/strong\u003e Pettit EZ-Fair 7050 is a two-part epoxy putty that must be mixed before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grit sandpaper should I use to smooth EZ-Fair 7050?\u003c\/strong\u003e After application over a primed keel surface, EZ-Fair 7050 should be sanded smooth with 80 grit sandpaper before additional finish coats are applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan EZ-Fair 7050 repair blistered gelcoat?\u003c\/strong\u003e Yes, its chemical and water resistant properties make Pettit EZ-Fair 7050 suitable for repairing blistered gelcoat on fiberglass surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a quart of EZ-Fair 7050 weigh?\u003c\/strong\u003e A quart of Pettit EZ-Fair 7050 (part number 705008) weighs 3 pounds.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":49017618530523,"sku":"PET-7050Q","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_c2204931-3c8a-4cb5-9070-9dc464e3913f.jpg?v=1785332788","url":"https:\/\/www.goodvibesmarina.com\/products\/pettit-ez-fair-7050-epoxy-fairing-compound-quart","provider":"Good Vibes Marina","version":"1.0","type":"link"}