{"product_id":"pettit-ez-poxy-electric-sapphire-blue-aerosol-one-part-polyurethane-topside-deck-paint-15-34-oz","title":"Pettit Paint EZ-Poxy Topside Paint, Electric Sapphire Blue, 15.34 oz Aerosol","description":"\u003cp\u003ePettit Paint EZ-Poxy is a one-part polyurethane topside and deck enamel in Electric Sapphire Blue, packaged in a convenient 15.34 fluid ounce aerosol can. The formula is fortified with silicone for a brilliant shine and easy brush-like flow, even from a spray can, and it is built around advanced ultraviolet filters that enhance gloss retention and durability over time. The result is a topside finish that goes on with minimal effort and cures to a lasting, gelcoat-like brilliance. EZ-Poxy is formulated to be exceptionally easy to apply, requiring less surface prep and technique than comparable two-part systems while still delivering a hard, glossy, water-resistant finish suited to hulls, topsides, and decks. It is intended for outdoor marine use and is water resistant once cured, with a full cure time of 24 hours. One aerosol can covers approximately 135 to 180 square feet, making it practical for touch-ups, trim work, small repairs, or full topside refinishing where a wide gloss color match is needed. Because color can vary slightly between the actual finish and printed color chips, it is good practice to test on an inconspicuous area first.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pettit Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1323720\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Electric Sapphire Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Code:\u003c\/strong\u003e #003049\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e One-part polyurethane enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Aerosol Spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Volume:\u003c\/strong\u003e 15.34 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 135 to 180 square feet per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance Level:\u003c\/strong\u003e Water resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor Usage:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Recommendation:\u003c\/strong\u003e Marine decks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725469031814\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish is this paint?\u003c\/strong\u003e This aerosol is Pettit Paint EZ-Poxy in Electric Sapphire Blue with a gloss finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EZ-Poxy a one-part or two-part paint system?\u003c\/strong\u003e EZ-Poxy is a one-part polyurethane topside and deck enamel, so no separate hardener or mixing is required before spraying part number 1323720.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much surface will one can cover?\u003c\/strong\u003e One 15.34 fluid ounce aerosol can of EZ-Poxy Electric Sapphire Blue covers approximately 135 to 180 square feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does EZ-Poxy take to fully cure?\u003c\/strong\u003e Full cure time for this Pettit EZ-Poxy aerosol is 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this paint be used both above and below the waterline?\u003c\/strong\u003e This EZ-Poxy aerosol is intended for outdoor marine topside and deck surfaces; it is water resistant once cured but is formulated as a topside and deck enamel rather than a below-waterline antifouling product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces is EZ-Poxy Electric Sapphire Blue designed for?\u003c\/strong\u003e Pettit recommends this EZ-Poxy formula for marine deck and topside surfaces, applied as an aerosol spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the aerosol color match the printed color chip exactly?\u003c\/strong\u003e Slight color differences can occur between the actual Electric Sapphire Blue finish and printed color chips, so testing on a small area first is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this product packaged?\u003c\/strong\u003e Pettit EZ-Poxy Electric Sapphire Blue (part number 1323720) ships as a single 15.34 fluid ounce aerosol spray can.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gives EZ-Poxy its gloss and durability?\u003c\/strong\u003e The formula is fortified with silicone for shine and brush-like flow, plus advanced ultraviolet filters that enhance gloss retention and durability over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the aerosol can weigh?\u003c\/strong\u003e The Pettit EZ-Poxy Electric Sapphire Blue aerosol, part number 1323720, weighs 2 pounds.\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":48991697273051,"sku":"PET-3237A","price":23.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/516sBidx2nL.jpg?v=1784510072","url":"https:\/\/www.goodvibesmarina.com\/products\/pettit-ez-poxy-electric-sapphire-blue-aerosol-one-part-polyurethane-topside-deck-paint-15-34-oz","provider":"Good Vibes Marina","version":"1.0","type":"link"}