{"product_id":"power-trim-relay-for-evinrude-johnson-outboards-replaces-18-5705-mpn-300-01561","title":"EMP Power Trim Relay for Evinrude Outboard Motors, Part 300-01561","description":"\u003cp\u003eThe EMP Power Trim Relay, part number 300-01561, is an electrical relay built for the power trim and tilt systems on Evinrude outboard motors. The trim relay is the switching component that directs battery current to the trim\/tilt pump motor when the operator presses the trim switch, allowing the outboard to raise and lower under power. When a trim relay fails or sticks, the outboard may not tilt or trim at all, or may trim in only one direction, so replacing the relay with a properly rated unit restores normal up\/down operation.\u003c\/p\u003e\u003cp\u003eThis relay is built to handle the higher current draw of a trim\/tilt motor circuit and is sized as a direct fit for Evinrude outboard trim relay applications. It is a compact, sealed electrical component intended to mount in the existing relay location in the outboard's wiring harness alongside the trim\/tilt system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 300-01561\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude outboard motor trim\/tilt systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080465227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the EMP 300-01561 relay used for?\u003c\/strong\u003e EMP part 300-01561 is a power trim relay that switches battery current to the trim\/tilt pump motor on an Evinrude outboard, allowing the motor to raise and lower when the trim switch is pressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this relay fit my Evinrude outboard?\u003c\/strong\u003e The EMP 300-01561 is designed for Evinrude outboard motor trim\/tilt systems; check that your outboard's trim relay is the failed component before ordering a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trim relay needs to be replaced?\u003c\/strong\u003e If an Evinrude outboard will not tilt or trim, trims in only one direction, or the trim motor runs but the outboard does not move, a failed trim relay such as the EMP 300-01561 is a common cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EMP 300-01561 trim relay weigh?\u003c\/strong\u003e The EMP 300-01561 power trim relay weighs 0.082 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the EMP 300-01561 relay?\u003c\/strong\u003e The UPC for the EMP 300-01561 Power Trim Relay is 840080465227.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EMP 300-01561 an OEM or aftermarket part?\u003c\/strong\u003e EMP 300-01561 is an aftermarket power trim relay manufactured to serve as a direct replacement in Evinrude outboard trim\/tilt circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 300-01561?\u003c\/strong\u003e Ordering EMP 300-01561 includes one power trim relay for the Evinrude outboard trim\/tilt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the trim relay myself?\u003c\/strong\u003e The EMP 300-01561 relay mounts in the outboard's existing trim relay location and connects to the existing wiring harness, which allows for straightforward replacement by anyone comfortable working with marine electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim relay affect steering or only trim\/tilt?\u003c\/strong\u003e The EMP 300-01561 relay is part of the trim\/tilt circuit only; it controls the up and down movement of the outboard and is not part of the steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms show up specifically from a bad trim relay versus a bad trim motor?\u003c\/strong\u003e With a failed trim relay like the EMP 300-01561, the trim\/tilt motor typically will not run at all in the affected direction because it is not receiving switched power, whereas a bad trim motor may hum or draw current without moving the outboard.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991284592859,"sku":"EMP-300-01561","price":15.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP-300-03085-BRP-Power-Trim-Relay__95312.1722371794.500.750.jpg?v=1785329112","url":"https:\/\/www.goodvibesmarina.com\/products\/power-trim-relay-for-evinrude-johnson-outboards-replaces-18-5705-mpn-300-01561","provider":"Good Vibes Marina","version":"1.0","type":"link"}