{"product_id":"safe-t-alert-62-carbon-monoxide-alarm-white-flush-mount-with-trim-ring-12-volt-hardwire-mwd-62-542-wt-tr","title":"Safe-T-Alert 62 Carbon Monoxide Alarm, White Flush Mount with Trim Ring, 12 Volt Hardwire, MWD-62-542-WT-TR","description":"\u003cp\u003eThe Safe-T-Alert 62 Carbon Monoxide Alarm (MWD-62-542-WT-TR) is a flush-mount, hardwired CO detector built specifically to operate reliably in the harsh conditions found on board a boat, where temperature swings and vibration can compromise ordinary household detectors. It runs on 13.8 VDC power with a low current draw of 37 mA, and it draws an alarm point at 400 PPM, sounding within 4 to 15 minutes of detecting that concentration. A rapid recovery sensor allows the mute circuit to temporarily silence the alarm while the cabin is ventilated, then automatically reactivates the alarm if dangerous CO levels return. A memory scan feature retains the CO level that triggered the alarm, so the reading that caused the activation is not lost once the air clears. The alarm is designed with a 5 year service life and will automatically signal an end-of-life warning once that cycle is complete, prompting timely replacement. Its flush mount housing is finished in white and ships with a trim ring that gives a clean, finished look while covering existing screw holes and cutouts from a prior installation. The unit also includes a low voltage warning at 7 volts and operates across a wide -40 to 158 degree F range, and it conforms to ANSI\/UL STD 2034.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Safe-T-Alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e MWD-62-542-WT-TR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Carbon Monoxide Alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12 VDC, 13.8 VDC nominal, 37 mA current draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Voltage Warning:\u003c\/strong\u003e 7 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40 to 158 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Point:\u003c\/strong\u003e 400 PPM, activates in 4 to 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Voltage Range:\u003c\/strong\u003e 13.8 volts, plus or minus 15 percent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Dimensions:\u003c\/strong\u003e 4.5 inches W x 3.25 inches H x 1.25 inches D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Trim ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Life:\u003c\/strong\u003e 5 years, with automatic end-of-life alert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e ANSI\/UL STD 2034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 715456625423\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Safe-T-Alert 62 carbon monoxide alarm detect and at what level?\u003c\/strong\u003e The Safe-T-Alert 62 (MWD-62-542-WT-TR) alarms at 400 PPM of carbon monoxide, sounding within 4 to 15 minutes of reaching that concentration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Safe-T-Alert 62 battery powered or hardwired?\u003c\/strong\u003e It is a hardwired unit that runs on 12 VDC power, drawing 37 mA at 13.8 VDC, with a low voltage warning that triggers at 7 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this carbon monoxide alarm installed?\u003c\/strong\u003e The MWD-62-542-WT-TR is a flush mount alarm, and it ships with a trim ring that covers existing screw holes or cutouts for a clean finished look, so it can drop into a previously used mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operating temperature range can the Safe-T-Alert 62 handle?\u003c\/strong\u003e It operates across -40 to 158 degrees F, which covers the temperature extremes typical of a boat's cabin or storage conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the Safe-T-Alert 62 last before it needs to be replaced?\u003c\/strong\u003e It has a 5 year service life, after which it automatically signals an end-of-life warning to alert the owner that it is time to replace the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the alarm be muted while the cabin is being ventilated?\u003c\/strong\u003e Yes, the Safe-T-Alert 62 has a mute circuit that can be activated to temporarily silence the alarm, and a rapid recovery sensor will reactivate it automatically if dangerous CO levels return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Safe-T-Alert 62 remember what triggered a past alarm?\u003c\/strong\u003e Yes, its memory scan feature retains the CO level that activated the alarm, preserving that reading even after the air clears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Safe-T-Alert 62 require to operate?\u003c\/strong\u003e It operates at 13.8 volts, plus or minus 15 percent, and issues a low voltage power warning if the supply drops to 7 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat certification does this carbon monoxide alarm meet?\u003c\/strong\u003e The Safe-T-Alert 62 conforms to ANSI\/UL STD 2034, the standard for carbon monoxide alarms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the case dimensions of the Safe-T-Alert 62?\u003c\/strong\u003e The case measures 4.5 inches wide by 3.25 inches high by 1.25 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Safe-T-Alert 62 come with a trim ring?\u003c\/strong\u003e Yes, a trim ring is included with the MWD-62-542-WT-TR to give a finished look while hiding existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Safe-T-Alert 62 weigh?\u003c\/strong\u003e The Safe-T-Alert 62 carbon monoxide alarm weighs 1 pound.\u003c\/p\u003e","brand":"Marine Technologies","offers":[{"title":"Default Title","offer_id":49028203839707,"sku":"MTI-62-542-WT-TR","price":68.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__97393.1758311099.500.750.jpg?v=1785165072","url":"https:\/\/www.goodvibesmarina.com\/products\/safe-t-alert-62-carbon-monoxide-alarm-white-flush-mount-with-trim-ring-12-volt-hardwire-mwd-62-542-wt-tr","provider":"Good Vibes Marina","version":"1.0","type":"link"}