{"product_id":"scanstrut-ds21a-p-small-cable-seal-ip68-waterproof-fits-connectors-to-0-83-inch-and-cables-0-165-0-35-inch","title":"Scanstrut DS21A-P Small Cable Seal, IP68 Waterproof, Fits Connectors to 0.83 Inch and Cables 0.165-0.35 Inch","description":"\u003cp\u003eThe Scanstrut DS21A-P is a small vertical cable seal designed to route a single cable or connector through a deck, console, or enclosure while maintaining a fully watertight barrier. It handles cables from 0.165 to 0.35 inches in diameter and connectors up to 0.83 inches across, making it a compact solution for marine and outdoor electronics installations such as antenna leads, sensor cables, and instrument wiring.\u003c\/p\u003e\u003cp\u003eThe seal uses a tapered bung and closed-cell base to achieve an IP68 ingress rating without the need for additional sealant. A split-bung design allows the seal to be installed around a connector that is already terminated, so there is no need to remove large connectors during installation, which reduces both complexity and the risk of damage. The low-profile dome shape adds impact resistance and helps deflect water away from the seal point while keeping a sleek appearance on deck.\u003c\/p\u003e\u003cp\u003eConstruction is UV-stable, impact-resistant marine-grade plastic, paired with 316 stainless steel fixings and a 3M waterproof gasket for long-term corrosion resistance in a marine environment. Captive nuts are built into the design for fast, repeatable installation, and the seal ships with both pre-drilled and blank bungs so it can be customized to the exact cable or connector being routed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Scanstrut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DS21A-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Shore Power Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter:\u003c\/strong\u003e 0.165 to 0.35 inches (4 to 9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Connector Diameter:\u003c\/strong\u003e 0.83 inches (21 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Split Bung\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-Stable Marine-Grade Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e 316 Stainless Steel with 3M Waterproof Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.83 inches L x 0.83 inches W x 1.02 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 5060114792784\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat cable sizes does the Scanstrut DS21A-P fit?\u003c\/strong\u003e The DS21A-P accepts cables from 0.165 to 0.35 inches (4 to 9 mm) in diameter, making it suited to single antenna leads, sensor cables, or instrument wiring runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum connector size for this cable seal?\u003c\/strong\u003e The DS21A-P can seal around connectors up to 0.83 inches (21 mm) in diameter, thanks to its split-bung design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to remove the connector to install the DS21A-P?\u003c\/strong\u003e No. The split bung on the DS21A-P opens to fit around an already-terminated connector, so there is no need to remove large connectors during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DS21A-P fully waterproof?\u003c\/strong\u003e Yes, the DS21A-P carries an IP68 ingress rating, achieved through a tapered bung and closed-cell base without requiring additional sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Scanstrut DS21A-P made from?\u003c\/strong\u003e It is built from UV-stable, impact-resistant marine-grade plastic, with 316 stainless steel fixings and a 3M waterproof gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the DS21A-P cable seal?\u003c\/strong\u003e The DS21A-P is finished in grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the DS21A-P?\u003c\/strong\u003e The DS21A-P measures 0.83 inches long by 0.83 inches wide by 1.02 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DS21A-P weigh?\u003c\/strong\u003e The DS21A-P weighs 0.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the DS21A-P come with mounting hardware?\u003c\/strong\u003e Yes, the DS21A-P includes 316 stainless steel fixings and a 3M waterproof gasket, along with captive nuts for secure installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the DS21A-P?\u003c\/strong\u003e The DS21A-P ships as a single seal with pre-drilled and blank bungs included, allowing it to be customized to the specific cable or connector being routed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the DS21A-P be used for more than one cable at a time?\u003c\/strong\u003e The DS21A-P is a single-cable seal designed for routing one cable or connector at a time through its split bung.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DS21A-P suitable for outdoor or marine environments?\u003c\/strong\u003e Yes, the DS21A-P is built for marine and outdoor electronics installations, using UV-stable plastic and 316 stainless steel hardware for long-term durability.\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":49031320502491,"sku":"SCA-DS21A-P","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41dfB_13mPL.jpg?v=1785213185","url":"https:\/\/www.goodvibesmarina.com\/products\/scanstrut-ds21a-p-small-cable-seal-ip68-waterproof-fits-connectors-to-0-83-inch-and-cables-0-165-0-35-inch","provider":"Good Vibes Marina","version":"1.0","type":"link"}