{"product_id":"scanstrut-rokk-wireless-surface-phone-charger-10w-qi-ipx6-waterproof-12-24v-flush-mount-sc-cw-02f","title":"Scanstrut ROKK Wireless Surface Phone Charger, 10W Qi IPX6 Waterproof 12\/24V Flush Mount, SC-CW-02F","description":"\u003cp\u003eThe Scanstrut ROKK Wireless Surface Phone Charger (SC-CW-02F) is a flush-mounted, wireless Qi-Certified charging pad built to work directly with 12\/24V onboard systems, so it wires straight into your boat's electrical panel with no separate power brick or cable to your phone. It is IPX6 waterproof certified, making it the first wireless charging system designed specifically for use on board rather than an adapted consumer charger. The newly upgraded 10W unit increases charging speed by up to 60% over earlier wireless marine chargers while eliminating the need for any charging wires at the phone itself.\u003c\/p\u003e\u003cp\u003eThe two-toned charge pad sits large and flush against any smooth surface, indoors or out, for a clean factory-look installation at the helm, in a cabin, or anywhere else a crew member needs quick access to charge a phone. A high friction, non-slip pad keeps the phone in place at speed or in a chop. Internally, the charger uses a thermal management system and a foreign object detection system to protect both the unit and the device being charged, and the housing is built from marine-grade materials with a UV stable finish so it holds up to sun and saltwater exposure over time.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward for a flush-mount 12\/24V accessory, and the charger draws under 0.1W in standby so it will not meaningfully drain the house battery when idle. It works with any Qi-compatible phone.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Scanstrut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SC-CW-02F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging Standard:\u003c\/strong\u003e Qi-Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage Range:\u003c\/strong\u003e 10-30V DC (12\/24V System)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Current Max:\u003c\/strong\u003e 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e 10W (9V, 1.1A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Current Draw:\u003c\/strong\u003e Less than 0.1W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IPX6 (Front and Back)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount, Surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 5060114798083\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Scanstrut SC-CW-02F ROKK Wireless Surface Phone Charger waterproof?\u003c\/strong\u003e Yes, the SC-CW-02F is IPX6 waterproof certified front and back, and it is designed specifically for onboard marine use rather than adapted from a standard consumer charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this charger run on?\u003c\/strong\u003e The ROKK Wireless Surface Phone Charger accepts an input voltage range of 10-30V DC, so it works directly on both 12V and 24V boat electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the SC-CW-02F charge a phone?\u003c\/strong\u003e It delivers up to 10W of output power (9V, 1.1A) and the upgraded unit increases charging speed by up to 60% compared to earlier wireless marine chargers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this charger work with any phone?\u003c\/strong\u003e The SC-CW-02F is Qi-Certified, so it is compatible with Qi-enabled phones without needing a separate charging cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the ROKK Wireless Surface Phone Charger mounted?\u003c\/strong\u003e It uses a large, two-toned charge pad that flush mounts to any smooth surface, indoors or out, for a clean installation at the helm or elsewhere on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill my phone slide off the charging pad while underway?\u003c\/strong\u003e The charge pad on the SC-CW-02F has a high friction, non-slip surface designed to keep a phone in place while the boat is moving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the charger draw when not in use?\u003c\/strong\u003e Standby current draw for the SC-CW-02F is less than 0.1W, so it has minimal impact on the house battery when a phone is not charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the charger's enclosure made of?\u003c\/strong\u003e The SC-CW-02F has a plastic enclosure built from marine-grade materials with a UV stable finish to resist sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ROKK Wireless Surface charger differ from the ROKK Wireless Catch charger?\u003c\/strong\u003e The Surface charger (SC-CW-02F) flush mounts to any smooth surface for a clean look, while the ROKK Wireless Catch is a separate model built with edging bumpers and a grip mat so it can also hold small items like keys or a wallet on a console top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the charger protect against overheating or foreign objects?\u003c\/strong\u003e Yes, the SC-CW-02F includes a thermal management system and a foreign object detection system to protect the charger and the connected device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SC-CW-02F charger?\u003c\/strong\u003e The ROKK Wireless Surface Phone Charger is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SC-CW-02F weigh?\u003c\/strong\u003e The Scanstrut ROKK Wireless Surface Phone Charger weighs 0.28 pounds.\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":49028204462299,"sku":"SCA-SC-CW-02F","price":89.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SCA-SC-CW-02F__76026.1739475841.500.750.jpg?v=1785165406","url":"https:\/\/www.goodvibesmarina.com\/products\/scanstrut-rokk-wireless-surface-phone-charger-10w-qi-ipx6-waterproof-12-24v-flush-mount-sc-cw-02f","provider":"Good Vibes Marina","version":"1.0","type":"link"}