{"product_id":"sea-dog-295090-1-stainless-steel-90-degree-rail-elbow-for-7-8-tube-316-investment-cast","title":"Sea-Dog 90 Degree Elbow Rail Fitting, 7\/8 Inch Tube, 316 Stainless Steel - 295090-1","description":"\u003cp\u003eThe Sea-Dog 295090-1 is a 90 degree elbow fitting designed for boat rail systems using 7\/8 inch outer diameter tubing. It is used to join two sections of rail at a right angle, letting builders and installers create clean corner transitions in bow rails, stanchion systems, and other tubular railing runs without cutting or welding. The fitting is constructed of corrosion resistant investment cast 316 stainless steel, with a stainless tube wall thickness of 0.049 inch, making it suitable for continuous marine exposure to saltwater and UV without rusting or pitting.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the elbow can be attached to the railing tube using set screws or pop riveted in place with stainless or aluminum rivets, whichever method suits the existing rail assembly. Set screws are included where appropriate for this fitting, and a 1\/8 inch Allen wrench is required to install them. Replacement set screws are also available separately under part number 299999-1 if extras are needed for a larger installation. The 295090-1 is sold and packed 10 pieces to a standard pack, making it a practical choice for boatbuilders, canvas and rail shops, and marine hardware stockists outfitting multiple rail runs. Its 90 degree bend and 7\/8 inch tube fit make it a direct match for standard 7\/8 inch rail systems where a square corner connection is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 295090-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Elbow (Rail Fitting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outer Diameter:\u003c\/strong\u003e 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 Stainless Steel (Investment Cast)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Tube Wall Thickness:\u003c\/strong\u003e 0.049 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Method:\u003c\/strong\u003e Set screws or pop rivets (stainless or aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool Required:\u003c\/strong\u003e 1\/8 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5.81 x 3.88 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514295017\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tubing does the Sea-Dog 295090-1 elbow fit?\u003c\/strong\u003e The 295090-1 fits 7\/8 inch outer diameter rail tubing, making the 90 degree bend in that tube size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is this elbow fitting?\u003c\/strong\u003e It is a 90 degree elbow, used to create a square corner transition in a rail run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 295090-1 made from?\u003c\/strong\u003e It is constructed of corrosion resistant investment cast 316 stainless steel with a stainless tube wall thickness of 0.049 inch, suitable for continuous marine and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this rail elbow installed?\u003c\/strong\u003e The 295090-1 can be attached to the rail tube with set screws or pop riveted in place using stainless or aluminum rivets. Set screws are included where appropriate, and a 1\/8 inch Allen wrench is required to tighten them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre set screws included with this fitting?\u003c\/strong\u003e Yes, set screws are included where appropriate for the 295090-1 elbow. Additional or replacement set screws are also sold separately under part number 299999-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 295090-1 weigh?\u003c\/strong\u003e This Sea-Dog 90 degree elbow weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in a pack?\u003c\/strong\u003e The 295090-1 elbow is sold in a standard pack of 10 pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this elbow?\u003c\/strong\u003e A 1\/8 inch Allen wrench is required to install the set screws on the 295090-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this elbow be riveted instead of using set screws?\u003c\/strong\u003e Yes, the 295090-1 can be pop riveted to the railing using stainless or aluminum rivets as an alternative to set screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 295090-1 elbow different from the 1 inch version?\u003c\/strong\u003e Yes, the 295090-1 is sized for 7\/8 inch tube, while the similar 295091-1 elbow is the 1 inch tube version; they are separate part numbers for different tube diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting rust in saltwater use?\u003c\/strong\u003e No, the 295090-1 is investment cast from 316 stainless steel, which is corrosion resistant and intended for marine saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 295090-1 elbow?\u003c\/strong\u003e The UPC for this Sea-Dog 7\/8 inch, 90 degree stainless steel elbow (295090-1) is 035514295017.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988568158427,"sku":"S-D-295090-1","price":19.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3952.jpg?v=1784423494","url":"https:\/\/www.goodvibesmarina.com\/products\/sea-dog-295090-1-stainless-steel-90-degree-rail-elbow-for-7-8-tube-316-investment-cast","provider":"Good Vibes Marina","version":"1.0","type":"link"}