{"product_id":"sea-dog-337426-1-flush-thru-vent-black-abs-fits-4in-hose-for-cabin-bilge-ventilation","title":"Sea-Dog Line Flush Thru Vent, Black ABS Hose Vent for Up to 4 Inch Exhaust Hose","description":"\u003cp\u003eThe Sea-Dog Line Flush Thru Vent (337426-1) is a black, injection molded ABS vent designed for cabin or bilge ventilation aboard boats and other marine vessels. It is sized for use with hose up to 4 inches, making it a practical choice for venting engine compartments, cabins, and bilge areas where consistent airflow is needed to reduce moisture buildup and control odors. The vent is constructed of UV resistant injection molded ABS, giving it resistance to sun exposure and outdoor marine conditions over time. Users should avoid contact with acetone or strong solvents, which can damage the ABS material. Installation is straightforward, using four number 8 flat head fasteners, which are not included, through a hole pattern sized to the vent's overall dimensions. With an overall size of 4-15\/16 inches and a vent area of 4.05 square inches, this flush-mount vent provides solid airflow while sitting flush against the mounting surface for a clean, low-profile finish. It is also available in the same size in white (337416-1) as a separate part, and in a smaller 3 inch hose size in both black (337326-1) and white (337316-1), so buyers should confirm color and hose size before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 337426-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection Molded ABS (UV resistant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose\/Hole Size:\u003c\/strong\u003e Up to 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimension (C):\u003c\/strong\u003e 4-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 3-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 3-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent Area:\u003c\/strong\u003e 4.05 square inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners Required:\u003c\/strong\u003e Four number 8 flat head fasteners (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514337212\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor use with hose up to 4 inches in diameter\u003c\/li\u003e\n\u003cli\u003eSuited for cabin or bilge ventilation applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the Sea-Dog Line 337426-1 flush vent fit?\u003c\/strong\u003e It is designed for use with hose up to 4 inches in diameter, making it suited for larger cabin or bilge ventilation runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 337426-1?\u003c\/strong\u003e This version of the Sea-Dog Line flush thru vent is black. The same 4 inch vent is also available in white as a separate part number, 337416-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this vent made for cabin or bilge use, or both?\u003c\/strong\u003e The Sea-Dog Line 337426-1 flush thru vent is designed for both cabin and bilge ventilation, so it can be used in either location depending on the boat's layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the flush vent made from?\u003c\/strong\u003e It is constructed of injection molded ABS that is UV resistant, allowing it to hold up to sun exposure in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the vent installed?\u003c\/strong\u003e The 337426-1 flush vent installs with four number 8 flat head fasteners, which are not included, through its molded mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this vent?\u003c\/strong\u003e The overall size is 4-15\/16 inches, with additional dimensions of 3-9\/16 inches (A), 3-3\/4 inches (B), and 5\/16 inches (D).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 337426-1 flush vent weigh?\u003c\/strong\u003e It weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this vent come with mounting hardware?\u003c\/strong\u003e No, the four number 8 flat head fasteners needed for installation are not included with the Sea-Dog Line 337426-1 vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I avoid any cleaning products with this vent?\u003c\/strong\u003e Yes, contact with acetone or strong solvents should be avoided, as these can damage the ABS construction of the 337426-1 vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version of this same vent available?\u003c\/strong\u003e Yes, Sea-Dog Line also makes a 3 inch version of this flush vent design, available as separate part numbers 337326-1 (black) and 337316-1 (white).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the vent area of the 337426-1?\u003c\/strong\u003e The vent area is 4.05 square inches, sized for the up-to-4-inch hose it is designed to work with.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988755787995,"sku":"S-D-337426-1","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7237_3672a465-ba72-41e5-b853-b6f0b66c6120.jpg?v=1784439611","url":"https:\/\/www.goodvibesmarina.com\/products\/sea-dog-337426-1-flush-thru-vent-black-abs-fits-4in-hose-for-cabin-bilge-ventilation","provider":"Good Vibes Marina","version":"1.0","type":"link"}