{"product_id":"sea-dog-513110-1-fresh-water-inlet-316-stainless-steel-dockside-shore-water-hookup-1-2-fipt-x-3-4-fght","title":"Sea-Dog Fresh Water Inlet, 316 Stainless Steel, 1\/2 Inch FIPT x 3\/4 Inch FGHT - 513110-1","description":"\u003cp\u003eThe Sea-Dog Fresh Water Inlet (513110-1) provides a fresh water hookup point on a boat's hull, letting you connect a standard garden hose to a pressurized onboard water system while moored at a dock or marina. It uses a standard female swivel hose connector so a hose threads on and off easily, and it comes with a black plastic watertight plug that seals the fitting when it is not connected to shore water, keeping the pipe run protected and free of debris.\u003c\/p\u003e\u003cp\u003eThe inlet is machined from investment cast 316 stainless steel, a corrosion-resistant alloy chosen for marine hardware that stays exposed to saltwater spray and weather. The pipe connection is 1\/2 inch FIPT (female iron pipe thread) on the inboard side and 3\/4 inch FGHT (female garden hose thread) on the outboard side, matching common marine plumbing and standard garden hose fittings. It mounts through the hull or deck with a #8 flat head fastener and is installed or removed using a 1\/2 inch Allen wrench.\u003c\/p\u003e\u003cp\u003eThis is deck hardware for the plumbing side of a boat's fresh water system rather than an engine or drivetrain component, so it fits any boat with a pressurized fresh water system and a suitable mounting location, without being tied to a specific engine or hull make.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 513110-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fresh Water Inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Investment Cast 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size:\u003c\/strong\u003e 1\/2 inch FIPT x 3\/4 inch FGHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Standard female swivel hose connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 2-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #8 FH (flat head)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Black plastic watertight plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Tool:\u003c\/strong\u003e 1\/2 inch Allen wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514513036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 513110-1 used for?\u003c\/strong\u003e The Sea-Dog 513110-1 is a fresh water inlet that lets you hook a garden hose to a boat's pressurized fresh water system while docked, so you can fill onboard tanks or run water without using the boat's own pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fitting does this inlet use?\u003c\/strong\u003e It has a standard female swivel hose connector on the outside, with a 1\/2 inch FIPT x 3\/4 inch FGHT pipe size connecting to the boat's plumbing, so a standard garden hose or shore water hose threads directly on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 513110-1 made from?\u003c\/strong\u003e It is machined from investment cast 316 stainless steel, a corrosion-resistant grade commonly used in marine deck hardware that is regularly exposed to saltwater and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the fresh water inlet come with a cap or plug?\u003c\/strong\u003e Yes, the Sea-Dog 513110-1 includes a black plastic watertight plug that seals the connector when it is not hooked up to a shore water hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this fitting?\u003c\/strong\u003e Installation and removal of the 513110-1 fresh water inlet uses a 1\/2 inch Allen wrench along with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog fresh water inlet weigh?\u003c\/strong\u003e The 513110-1 weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 513110-1?\u003c\/strong\u003e The fitting measures 2-3\/4 inches at dimension A, 2-3\/8 inches at dimension B, 2-3\/16 inches at dimension C, and 1 inch at dimension D, secured with a #8 flat head fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the male or female hose connection?\u003c\/strong\u003e The 513110-1 fresh water inlet has a standard female swivel hose connector, designed to receive a male hose fitting from a garden hose or shore water supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this fresh water inlet and Sea-Dog's washdown water outlet?\u003c\/strong\u003e The 513110-1 fresh water inlet has a female swivel hose connector for supplying water into the boat's pressurized system, while Sea-Dog's washdown water outlet is a separate part with a male hose connector for drawing water out to a washdown hose; the two look similar but serve opposite functions and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fitting work on any boat?\u003c\/strong\u003e The 513110-1 is deck hardware for a boat's fresh water plumbing and is not tied to a specific engine or hull make, so it fits any boat with a pressurized fresh water system and a suitable mounting location for the 1\/2 inch FIPT x 3\/4 inch FGHT connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a shutoff valve needed with this inlet?\u003c\/strong\u003e The fresh water inlet itself is a hose hookup fitting; the dossier does not specify an integrated shutoff, so check your onboard plumbing for a valve if one is needed to regulate flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 513110-1?\u003c\/strong\u003e The UPC for the Sea-Dog Fresh Water Inlet, part number 513110-1, is 035514513036.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988825125083,"sku":"S-D-513110-1","price":34.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7173.jpg?v=1784429688","url":"https:\/\/www.goodvibesmarina.com\/products\/sea-dog-513110-1-fresh-water-inlet-316-stainless-steel-dockside-shore-water-hookup-1-2-fipt-x-3-4-fght","provider":"Good Vibes Marina","version":"1.0","type":"link"}