{"product_id":"sea-hawk-tuff-stuff-2-gallon-epoxy-primer-kit-light-gray-part-1284glkit","title":"Sea Hawk Tuff Stuff 2 Gallon Epoxy Primer Kit, Light Gray, Part 1284GLKIT","description":"\u003cp\u003eThe Sea Hawk Tuff Stuff 2 Gallon Kit (part number 1284GLKIT) is a high-build two-part epoxy primer in a light gray finish, formulated to dry fast so a complete barrier system and bottom paint can be applied in as little as two days. It is designed for blister prevention on fiberglass hulls, where its dense, oil- and water-resistant film helps keep moisture out of the laminate below the waterline. The same resistance to oil and water also makes it effective as a bilge coating, standing up to the fuel, oil, and standing water conditions found in a bilge compartment.\u003c\/p\u003e\u003cp\u003eBeyond fiberglass hull work, this epoxy primer doubles as a universal corrosion-protection primer for most metals below the waterline, including props, keels, trim tabs, thru hulls, and lower units, as well as for general metal priming tasks. As a two-part epoxy system, it cures to a hard, durable film that forms the foundation coat beneath antifouling bottom paint. The 2 gallon kit size is suited to full hull priming jobs and larger metal-protection projects where a single quart or gallon would not be enough. This product is not for sale in California.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea Hawk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1284GLKIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Two-Part High-Build Epoxy Primer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint Type:\u003c\/strong\u003e Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Size:\u003c\/strong\u003e 2 Gallon Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 811577013276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Fiberglass hulls, bilge coating, and metals below the waterline (props, keels, trim tabs, thru hulls, lower units)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Compliance:\u003c\/strong\u003e Not for sale in California\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea Hawk Tuff Stuff 2 Gallon Kit used for?\u003c\/strong\u003e Sea Hawk Tuff Stuff 1284GLKIT is a high-build two-part epoxy primer used to prevent blisters on fiberglass hulls, coat bilges, and protect metals below the waterline such as props, keels, trim tabs, thru hulls, and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take before bottom paint can go over this primer?\u003c\/strong\u003e This epoxy primer dries fast enough that a complete barrier system and bottom paint can be applied over the Sea Hawk Tuff Stuff kit in as little as two days.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size does the 1284GLKIT kit come in?\u003c\/strong\u003e The 1284GLKIT is a 2 gallon kit of Sea Hawk Tuff Stuff epoxy primer in a light gray color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this primer be used on metal parts, not just fiberglass?\u003c\/strong\u003e Yes, the Sea Hawk Tuff Stuff epoxy primer can be used as a universal primer for corrosion protection on most metals below the waterline, including props, keels, trim tabs, thru hulls, and lower units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this primer suitable for use as a bilge coating?\u003c\/strong\u003e Yes, because it resists both oil and water, the Sea Hawk Tuff Stuff 1284GLKIT is effective as a bilge coating in addition to its use as a hull barrier primer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea Hawk Tuff Stuff primer an epoxy or oil-based product?\u003c\/strong\u003e It is a two-part epoxy primer with an oil paint type, combining epoxy's protective film with fast dry times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sea Hawk Tuff Stuff 1284GLKIT primer?\u003c\/strong\u003e It is light gray, which is the color designation built into the 1284GLKIT part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2 gallon kit weigh?\u003c\/strong\u003e The Sea Hawk Tuff Stuff 2 gallon kit (1284GLKIT) weighs 22.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this product available for sale in California?\u003c\/strong\u003e No, the Sea Hawk Tuff Stuff 1284GLKIT epoxy primer is not for sale in California.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this primer help prevent hull blisters?\u003c\/strong\u003e Yes, blister prevention on fiberglass hulls is a primary intended use of the Sea Hawk Tuff Stuff 2 gallon epoxy primer kit.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"Default Title","offer_id":49031300350171,"sku":"S-H-1284GLKIT","price":233.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31MksQ85fYL.jpg?v=1785212829","url":"https:\/\/www.goodvibesmarina.com\/products\/sea-hawk-tuff-stuff-2-gallon-epoxy-primer-kit-light-gray-part-1284glkit","provider":"Good Vibes Marina","version":"1.0","type":"link"}