{"product_id":"seastar-cc17010-400-series-10-ft-control-cable-for-1993-date-mercury-mariner-force-and-pre-1979-omc-johnson-evinrude","title":"SeaStar CC17010 400 Series Control Cable, 10 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17010 is a 400 Series standard-type control cable engineered as a direct, OEM-style replacement for pre-1979 OMC, Johnson, and Evinrude outboard engines equipped with BRP\/OMC control heads. Measuring 10 feet in length, it uses the existing connection components at the control head, so installation follows the same routing and attachment points as the original cable it replaces.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and conduit fittings paired with stainless or nylon-covered core wires and moisture protective seals, giving the cable added resistance to corrosion at the connection points. The core wire runs inside a long-wearing HDPE liner that is ultra smooth and lubricated for life, supporting an 8-inch minimum bend radius during installation. The black HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, making it suited to the marine environment.\u003c\/p\u003e\u003cp\u003eEach cable is environmentally tested for marine applications and is built to exceed the engine manufacturer's specifications. It is made in the U.S.A. And is lifetime lubricated at the factory. Before ordering, verify that 10 feet is the correct cable length for your specific control run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon-covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e BRP\/OMC controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957020888\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboard engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17010 control cable fit?\u003c\/strong\u003e The CC17010 is designed for pre-1979 OMC, Johnson, and Evinrude outboard engines equipped with BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC17010 is 10 feet in length, part of the 400 Series standard cable line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable connect to my existing control head without modification?\u003c\/strong\u003e Yes, the CC17010 is a drop-in replacement engineered to use the existing connection components on pre-1979 OMC\/Johnson\/Evinrude control heads with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17010 has a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the terminals and core wire?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are used along with stainless or nylon-covered core wires and moisture protective seals for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar CC17010 come pre-lubricated?\u003c\/strong\u003e Yes, this cable is lifetime lubricated at the factory, and the HDPE liner is ultra smooth for reduced friction over the life of the cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17010 weigh?\u003c\/strong\u003e The SeaStar CC17010 control cable weighs 1.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for installation?\u003c\/strong\u003e The CC17010 has an 8-inch minimum bend radius, which should be respected when routing the cable during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable made to a higher standard than the original equipment cable?\u003c\/strong\u003e The CC17010 is built to exceed the engine manufacturer's specifications and is environmentally tested for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CC17010 manufactured?\u003c\/strong\u003e This control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 10 feet is the right length for my boat?\u003c\/strong\u003e Measure your existing control cable run before ordering the CC17010, since control cables must match the application length for proper operation; the 10-foot length will not work if a different length is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17010 replace both throttle and shift cables?\u003c\/strong\u003e The CC17010 is a single 400 Series control cable assembly for use with BRP\/OMC control heads on pre-1979 OMC\/Johnson\/Evinrude engines; check your control head setup to confirm the correct cable for throttle or shift function.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989277061339,"sku":"TEL-CC17010","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_47d65b02-fe0a-483f-964a-c58b6469f9b6.jpg?v=1784474814","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc17010-400-series-10-ft-control-cable-for-1993-date-mercury-mariner-force-and-pre-1979-omc-johnson-evinrude","provider":"Good Vibes Marina","version":"1.0","type":"link"}