{"product_id":"seastar-cc17011-400-series-control-cable-11-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17011 400 Series Control Cable, 11 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17011 is an 11-foot, 400 Series control cable engineered as a direct drop-in replacement for the original equipment cable on pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP\/OMC control heads. It uses the existing connection components at the control head and engine end, so no modification is needed to install it in place of the worn factory cable. The cable is built with stainless steel terminals and brass fittings for corrosion resistance, along with stainless or nylon covered core wires protected by moisture seals, extending service life in salt water and humid marine environments. A black HDPE outer jacket resists abrasion and withstands prolonged exposure to UV, salt water, chemicals, gasoline, and oil, while the smooth HDPE liner is lubricated for life at the factory to keep shifting and throttle response consistent. The cable has an 8-inch minimum bend radius, which should be respected during routing and installation to avoid kinking the core wire or liner. Every SeaStar control cable is environmentally tested for marine use and exceeds the engine manufacturer's specifications, and is backed by a two-year recreational user warranty against manufacturing defects. This cable is made in the U.S.A. Before ordering, confirm that 11 feet is the correct length for your boat's control-to-engine run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboards with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDirect drop-in replacement using existing OEM connection components; no specific OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CC17011 control cable used for?\u003c\/strong\u003e The CC17011 is an 11-foot, 400 Series control cable used to operate shift and throttle functions on pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17011 fit a 1985 Evinrude with BRP controls?\u003c\/strong\u003e No. The CC17011 is designed specifically for pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls, so a later-model engine outside that range is not the intended application for this cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC17011 measures 11 feet, matching the length designation in its part number, and this is the length you should verify against your boat's control-to-engine run before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17011 a genuine SeaStar part or aftermarket?\u003c\/strong\u003e It is a genuine SeaStar 400 Series control cable, designed as an OEM direct-replacement type cable that uses the existing connection components at the control head and engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A black HDPE outer jacket covers the CC17011, which resists abrasion and withstands prolonged exposure to UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17011 come pre-lubricated?\u003c\/strong\u003e Yes, the CC17011's HDPE liner is lubricated for life at the factory, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e 8 inches is the minimum bend radius for the CC17011; routing it tighter than that can damage the core wire or liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17011 weigh?\u003c\/strong\u003e The SeaStar CC17011 weighs 1.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the CC17011 myself?\u003c\/strong\u003e Yes, the CC17011 is built as a drop-in replacement that uses the existing OEM connection components, so it installs in place of the worn factory cable without modification, though correct length verification before ordering is essential.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17011?\u003c\/strong\u003e SeaStar backs the CC17011 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17011 manufactured?\u003c\/strong\u003e The SeaStar CC17011 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core wire type does the CC17011 use?\u003c\/strong\u003e The CC17011 uses stainless or nylon covered core wires with moisture protective seals for added corrosion protection and longer service life.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989278175451,"sku":"TEL-CC17011","price":53.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_ed6e48ae-238f-4508-b17b-d58dcc9ffae8.jpg?v=1784474838","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc17011-400-series-control-cable-11-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}