{"product_id":"seastar-cc21013-13-ft-630-type-control-cable-for-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21013 Control Cable, Mariner 630 Type, 13 Feet - Fits Pre-1993 Mariner 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21013 is a 13-foot Mariner 630 type control cable built for pre-1993 Mariner outboards of 40 HP and less that use Mariner\/Mercury controls. It uses a 10-32 threaded terminal and a clamp-type fitting at each end, so it works with the existing connection components on compatible aftermarket and Original Equipment Manufacturer control setups. The cable is engineered for both throttle and shift applications where a 630 type Mariner cable is called for.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and conduit fittings along with stainless steel Lubri-Core wires protected by moisture seals, giving the cable added corrosion protection and a longer service life. The core is lubricated for life inside a long-wearing HDPE liner for an ultra smooth feel at the helm. A heavy, red HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel, and it exceeds engine manufacturer specifications for control cable performance.\u003c\/p\u003e\u003cp\u003eEach CC21013 cable is environmentally tested for marine applications and is made in the U.S.A. Before ordering, confirm that 13 feet is the correct length for your control run, since control cables must be ordered to the exact length needed for proper operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\/Type:\u003c\/strong\u003e Mariner 630 Type (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal End:\u003c\/strong\u003e 10-32 Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Clamp-Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Fitting Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless Steel Lubri-Core Wire with Moisture Protective Seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e Heavy Red HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957001788\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1993 Mariner outboards, 40 HP and less, with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CC21013 control cable fit?\u003c\/strong\u003e The SeaStar CC21013 fits pre-1993 Mariner outboards rated 40 HP and less that use Mariner\/Mercury controls, and it is built to the Mariner 630 type standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21013 cable?\u003c\/strong\u003e This SeaStar control cable measures 13 feet, matching the 13-foot designation in its CC21013 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminal ends does this cable use?\u003c\/strong\u003e The CC21013 has a 10-32 threaded terminal and a clamp-type fitting at each end, allowing it to use the existing connection components on compatible controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable work with Original Equipment Manufacturer controls or only aftermarket ones?\u003c\/strong\u003e The CC21013 is designed to work with both aftermarket engine controls and Original Equipment Manufacturer units that accept a 10-32 threaded, Mariner 630 type control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the CC21013 cable?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are paired with stainless steel Lubri-Core wires and moisture protective seals, all enclosed in a heavy red HDPE outer jacket for corrosion and abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tight of a bend can this cable handle during installation?\u003c\/strong\u003e The CC21013 has an 8 inch minimum bend radius, which should be maintained when routing the cable through the boat to avoid binding or premature wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel does the control end of the CC21013 cable have?\u003c\/strong\u003e The end rod on the CC21013 provides 3 inches of travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21013 pre-lubricated?\u003c\/strong\u003e Yes, the SeaStar CC21013 is lubricated at the factory for life, so no additional lubrication of the core is required before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21013 tested for marine use?\u003c\/strong\u003e Yes, this SeaStar control cable is environmentally tested for marine applications and exceeds engine manufacturer specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21013 control cable manufactured?\u003c\/strong\u003e The CC21013 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires does the CC21013 cable have?\u003c\/strong\u003e The CC21013 is a 2-wire control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CC21013 outer jacket?\u003c\/strong\u003e The outer jacket on the CC21013 is black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989290496219,"sku":"TEL-CC21013","price":66.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_af70a306-4a15-4fac-8cae-87944ce115db.jpg?v=1784474980","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc21013-13-ft-630-type-control-cable-for-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}