{"product_id":"seastar-cc21017-marine-control-cable-17-ft-mariner-630-series-fits-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21017 630 Type Control Cable, 17 Feet - Mariner Pre-1993 40 HP and Under with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21017 is a 17 foot 630 type control cable engineered for Mariner outboards built before 1993 in the 40 HP and under range that use Mariner\/Mercury controls. It transmits throttle and shift motion from the control head to the engine through a 10-32 threaded terminal and clamp-type fitting at each end, so it works with the existing connection components on compatible controls rather than requiring new hardware.\u003c\/p\u003e\u003cp\u003eConstruction centers on a stainless steel Lubri-Core wire inside a long-wearing HDPE liner that is lubricated for life, with stainless steel terminals and conduit fittings and moisture protective seals at each wire for corrosion resistance. The outer jacket resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil, and the cable is built with an 8 inch minimum bend radius and 3 inches of end rod travel. SeaStar states that this cable exceeds the engine manufacturer's specifications and that its control cables are environmentally tested for marine applications and meet ABYC safety standards and ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003eThis is the standard 630 type cable; SeaStar also offers an XTREME premium version of the same cable type for applications where minimum lost motion at the control is a priority. The CC21017 is made in the U.S.A. And is lubricated at the factory for the life of the cable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 630 Type Control Cable (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Thread:\u003c\/strong\u003e 10-32 threaded terminal, clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Fitting Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Multi-strand stainless steel Lubri-Core wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and lower) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSeaStar Solutions Control Cable Part Number 032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC21017 control cable fit?\u003c\/strong\u003e The CC21017 fits Mariner outboards from before 1993 rated 40 HP and lower that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21017 control cable?\u003c\/strong\u003e It is a 17 foot control cable, and buyers should verify this is the correct length for their control run before ordering since control cables are not field-adjustable in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the CC21017 replace?\u003c\/strong\u003e The CC21017 replaces SeaStar Solutions Control Cable Part Number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21017 a standard or premium cable?\u003c\/strong\u003e The CC21017 is the standard version of SeaStar's 630 type control cable; a premium XTREME version of the same cable type is also offered for applications where minimum lost motion is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC21017 made of?\u003c\/strong\u003e It uses a multi-strand stainless steel Lubri-Core wire inside an HDPE liner, with stainless steel terminals and conduit fittings and a black HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21017 come pre-lubricated?\u003c\/strong\u003e Yes, the CC21017 is lubricated at the factory for the life of the cable and does not require additional lubrication before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size threaded ends does the CC21017 use?\u003c\/strong\u003e The CC21017 has a 10-32 threaded terminal with a clamp-type fitting at each end, designed to use the existing connection components on compatible controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21017 weigh?\u003c\/strong\u003e The CC21017 weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21017 resistant to weather and fuel exposure?\u003c\/strong\u003e Yes, its HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, and it is environmentally tested for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for the CC21017?\u003c\/strong\u003e The CC21017 has an 8 inch minimum bend radius and 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21017 control cable manufactured?\u003c\/strong\u003e The CC21017 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21017 meet marine industry safety standards?\u003c\/strong\u003e SeaStar states its control cables, including the CC21017, exceed the engine manufacturer's specifications and meet ABYC safety standards and ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989292724443,"sku":"TEL-CC21017","price":70.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71MTCCiqO8L.jpg?v=1784475043","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc21017-marine-control-cable-17-ft-mariner-630-series-fits-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}