{"product_id":"seastar-cc21020-marine-control-cable-20-ft-fits-mariner-pre-1993-40-hp-under-with-mariner-mercury-controls-3300-33c-type","title":"SeaStar CC21020 Control Cable, 20 Feet, Mariner 630 Type - Fits Pre-1993 Mariner 40 HP and Lower with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21020 is a 20-foot Mariner 630 type (standard) control cable built to move a Mariner outboard's throttle or shift linkage with a smooth, reliable feel. It is designed as an OEM direct-replacement type cable for Mariner outboards (pre-1993, 40 HP and lower) equipped with Mariner\/Mercury controls, using a 10-32 threaded terminal and clamp-type fitting at each end so it connects to the existing control hardware without modification.\u003c\/p\u003e\u003cp\u003eConstruction is built for saltwater duty: stainless steel terminals and conduit fittings resist corrosion, while the stainless\/nylon covered core wire runs inside a long-wearing HDPE liner that is lubricated for life at the factory for an ultra-smooth feel. Moisture protective seals guard the core wire against water intrusion, and the heavy red HDPE outer jacket resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil. The cable provides 3 inches of end rod travel and an 8-inch minimum bend radius, and it exceeds the engine manufacturer's specifications while meeting ABYC safety standards and ISO\/IMCI\/NMMA certification requirements. It is environmentally tested for marine applications and made in the U.S.A., backed by a two-year recreational user warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Mariner 630 Type (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable End Connection:\u003c\/strong\u003e 10-32 Threaded Terminal, Clamp-Type Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957021700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-Year Recreational User Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and lower) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC21020 control cable fit?\u003c\/strong\u003e The CC21020 is designed for Mariner outboards, pre-1993, 40 HP and lower, that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21020 control cable?\u003c\/strong\u003e This control cable measures 20 feet, matching the length designation in its part number CC21020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of end connection does the CC21020 use?\u003c\/strong\u003e A 10-32 threaded terminal with a clamp-type fitting is used at each end of the CC21020, allowing it to connect to existing control hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e 8 inches is the minimum bend radius for the CC21020 control cable, which helps it route through tight engine compartments without kinking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21020 provide?\u003c\/strong\u003e 3 inches of end rod travel is provided by the CC21020, matching standard Mariner 630 type control cable specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the CC21020 construction?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are paired with a stainless\/nylon covered core wire and a red HDPE outer jacket on the CC21020 for corrosion resistance and abrasion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21020 replace an existing SeaStar part number?\u003c\/strong\u003e Yes, the CC21020 replaces SeaStar Solutions control cable part number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the CC21020 and the premium XTREME version?\u003c\/strong\u003e The CC21020 is the standard version of this control cable; the premium version, CCX633xx, adds SeaStar's XTREME Technology for easier movement with minimal lost motion, recommended for long runs, twin stations, or routings with multiple bends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21020 weigh?\u003c\/strong\u003e 2.07 pounds is the weight of the SeaStar CC21020 control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21020 made in the USA?\u003c\/strong\u003e Yes, the CC21020 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC21020?\u003c\/strong\u003e A two-year recreational user warranty against manufacturing defects covers the CC21020 control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21020 factory lubricated?\u003c\/strong\u003e Yes, the CC21020 is lubricated at the factory for life, with an ultra-smooth HDPE liner that reduces friction over the life of the cable.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989293117659,"sku":"TEL-CC21020","price":74.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_7e2fc219-bb3b-4daa-b606-b377cba9ba8e.jpg?v=1784475057","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc21020-marine-control-cable-20-ft-fits-mariner-pre-1993-40-hp-under-with-mariner-mercury-controls-3300-33c-type","provider":"Good Vibes Marina","version":"1.0","type":"link"}