{"product_id":"seastar-cc21021-control-cable-21-ft-630-type-for-pre-1993-mariner-40-hp-and-under-with-mariner-mercury-controls","title":"SeaStar CC21021 Control Cable, 21 Foot, 630 Type for Mariner Pre-1993 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21021 is a 21 foot control cable built to the 630 type standard for outboard engines using Mariner\/Mercury style controls. It is designed as a direct-fit cable for Mariner outboards built pre-1993 at 40 HP and under that use Mariner\/Mercury controls, giving these older rigs a reliable, factory-style replacement for a worn or seized original cable. The cable terminates with 10-32 threaded terminal ends and a clamp-type fitting at each end so it connects using the boat's existing control hardware, with 3 inches of end rod travel and an 8 inch minimum bend radius for routing through tight engine compartments. Construction is built around stainless steel terminals and conduit fittings for corrosion resistance, paired with a heavy-duty HDPE outer jacket that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The core wire and liner are lubricated at the factory for smooth, low-friction operation over the life of the cable, reducing the stiff or sticky throttle and shift feel that develops as older cables age. The cable is manufactured in the U.S.A. And is built to exceed the engine manufacturer's specifications for this control cable type.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e 630 Type (Mariner Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 21 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mariner (Pre-1993, 40 HP and less) with Mariner\/Mercury Controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 10-32 Threaded Terminal, Clamp-Type Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.74 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957026835\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eMariner outboards (Pre-1993, 40 HP and less) equipped with Mariner\/Mercury controls.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e032377-3-xxx\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the CC21021 control cable fit?\u003c\/strong\u003e The SeaStar CC21021 is built for Mariner outboards from before 1993 rated 40 HP and less that use Mariner\/Mercury style controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21021 cable?\u003c\/strong\u003e This 630 type cable, part number CC21021, measures 21 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CC21021 cable replace?\u003c\/strong\u003e The CC21021 is a direct replacement for SeaStar control cable part number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal ends does this cable use?\u003c\/strong\u003e 10-32 threaded terminal ends with a clamp-type fitting at each end, so the CC21021 connects using the boat's existing control hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21021 made from corrosion-resistant materials?\u003c\/strong\u003e Yes, the cable uses stainless steel terminals and conduit fittings along with a nylon and stainless steel core for added corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of and how durable is it?\u003c\/strong\u003e A heavy-duty HDPE outer jacket covers the CC21021, resisting abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for routing this cable?\u003c\/strong\u003e The CC21021 has an 8 inch minimum bend radius, which should be accounted for when routing it through the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21021 provide?\u003c\/strong\u003e This control cable provides 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21021 need to be lubricated after installation?\u003c\/strong\u003e No, the CC21021 is lubricated at the factory for the life of the cable, so no additional lubrication is required at install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21021 control cable manufactured?\u003c\/strong\u003e The SeaStar CC21021 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21021 weigh?\u003c\/strong\u003e The CC21021 control cable weighs 1.74 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21021 a genuine SeaStar part or an aftermarket copy?\u003c\/strong\u003e The CC21021 is a genuine SeaStar 630 type control cable, engineered to exceed the engine manufacturer's specifications rather than a generic aftermarket substitute.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989293445339,"sku":"TEL-CC21021","price":77.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_2461a5d7-2f8f-44b4-adef-1e3045e34d4f.jpg?v=1784475069","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc21021-control-cable-21-ft-630-type-for-pre-1993-mariner-40-hp-and-under-with-mariner-mercury-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}