{"product_id":"seastar-cc40011-40bc-control-cable-11-ft-mercury-sport-jet-175-hp-throttle-reverse-gate-replacement","title":"SeaStar 40BC Control Cable CC40011, 11 Foot, for Mercury Sport Jet 175 HP Outboards","description":"\u003cp\u003eThe SeaStar CC40011 is an 11 foot, 40BC-style control cable engineered as a drop-in replacement for original equipment throttle and reverse-gate cables on Mercury Sport Jet outboards. It is built for controls that accept a 40BC high-load, stainless steel cable and terminates in a 1\/4-28 threaded end at the control, allowing it to use the boat's existing connection components without modification.\u003c\/p\u003e\u003cp\u003eThis is a midrange-duty cable, constructed with a heavier outer jacket and a stainless steel Lubri-Core center for smooth, low-friction operation under high load. Because of the Lubri-Core construction, the cable requires an 8 inch minimum bend radius during installation and routing. All exposed fittings are stainless steel for corrosion resistance in the marine environment. The cable is designed specifically for Mercury Sport Jet 175 HP outboards equipped with controls that accept the 40BC cable type.\u003c\/p\u003e\u003cp\u003eSeaStar control cables of this style are offered in a range of lengths, from 6 to 50 feet, using the same part number stem with the length in feet appended; lengths above 30 feet are only available in two-foot increments. Confirm the CC40011's 11 foot length matches your existing cable run before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC40011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 40BC high-load control cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Construction:\u003c\/strong\u003e Stainless steel Lubri-Core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket:\u003c\/strong\u003e Heavier midrange-duty jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection End:\u003c\/strong\u003e 1\/4-28 threaded end at control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches (Lubri-Core construction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282277758\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Sport Jet 175 HP outboards with controls that accept a 40BC cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CC40011 control cable used for?\u003c\/strong\u003e The CC40011 is a 40BC-style throttle and reverse-gate control cable used to replace original equipment control cables on Mercury Sport Jet outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the CC40011 control cable?\u003c\/strong\u003e CC40011 is 11 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC40011 fit Mercury Sport Jet outboards?\u003c\/strong\u003e Yes, the CC40011 is made for Mercury Sport Jet 175 HP outboards that have controls accepting a 40BC high-load, stainless steel cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connection does the CC40011 use?\u003c\/strong\u003e It terminates in a 1\/4-28 threaded end at the control, matching the original equipment connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable core made of?\u003c\/strong\u003e The CC40011 uses a stainless steel Lubri-Core center with stainless steel fittings for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC40011 weigh?\u003c\/strong\u003e The CC40011 control cable weighs 2.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC40011 a drop-in replacement for the OEM cable?\u003c\/strong\u003e Yes, the CC40011 is engineered as a drop-in replacement and uses the boat's existing connection components, so no modification is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for the CC40011 during installation?\u003c\/strong\u003e Due to its Lubri-Core construction, the CC40011 requires an 8 inch minimum bend radius when routed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre lengths other than 11 feet available for this cable style?\u003c\/strong\u003e Yes, this control cable style is offered in lengths from 6 to 50 feet, with lengths above 30 feet available only in two-foot increments; the CC40011 is the 11 foot version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the '40BC' designation mean for this cable?\u003c\/strong\u003e 40BC identifies the cable as a high-load, stainless steel control cable sized for controls that specifically accept the 40BC cable type, as used on the CC40011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC40011 include stainless steel fittings?\u003c\/strong\u003e Yes, the CC40011 comes with stainless steel fittings at the cable ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CC40011 control cable?\u003c\/strong\u003e The UPC for the SeaStar CC40011 control cable is 808282277758.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989294854363,"sku":"TEL-CC40011","price":172.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11L5sNUOMHL.jpg?v=1784475121","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-cc40011-40bc-control-cable-11-ft-mercury-sport-jet-175-hp-throttle-reverse-gate-replacement","provider":"Good Vibes Marina","version":"1.0","type":"link"}