{"product_id":"seastar-ho7100-field-installed-bulkhead-kit-single-hose-pair-stainless-steel-hose-fitting","title":"SeaStar HO7100 Single Hose Bulkhead Kit, Stainless Steel, Pair","description":"\u003cp\u003eThe SeaStar HO7100 is a field-installable bulkhead kit designed to let boaters route a hose cleanly and safely through the hull. Sold as a pair, the kit is built for single hose applications and uses a split grommet design that fits directly onto an existing hose assembly, so there is no need to disconnect fittings or re-run the hose from scratch. A split pigtail with snap-fit tabs holds the assembly together with a positive, secure feel once installed correctly. Stainless steel cover plates give the fitting a clean, corrosion-resistant finish that blends with a boat's existing stainless trim, offering a cosmetic upgrade over standard bulkhead fittings while maintaining a safe, sealed hull penetration. Because the components are field installable, this kit works as a straightforward retrofit onto a standard hose kit already in place, making it a practical solution for boaters looking to tidy up hose routing without replacing the entire steering hose run. The pair configuration means two matching fittings are included, suited to installations that route a single hose through two points or that need a matched replacement set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bulkhead Kit, Single Hose, Pair, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Single hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 fittings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel cover plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Split grommet with split pigtail and snap-fit tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Field installable onto a standard hose kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9 x 6 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957934642\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7100 bulkhead kit used for?\u003c\/strong\u003e The HO7100 is a bulkhead fitting kit that lets a single hose pass cleanly through a boat's hull, giving a finished, sealed look at the penetration point while keeping the hose routing tidy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7100 come with one fitting or two?\u003c\/strong\u003e It is sold as a pair, so two matching stainless steel bulkhead fittings are included in the HO7100 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 kit for a single hose or dual hose setup?\u003c\/strong\u003e This kit is the single hose version of SeaStar's bulkhead fittings, designed around one hose passing through each fitting rather than a dual-hose configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the HO7100 without removing my existing hose?\u003c\/strong\u003e Yes, the HO7100 uses a split grommet and split pigtail design with snap-fit tabs, so it can be field installed directly onto a standard hose assembly that is already in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the HO7100 cover plates made from?\u003c\/strong\u003e The cover plates on the HO7100 bulkhead kit are stainless steel, chosen for corrosion resistance and a finish that matches other stainless hardware on a boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HO7100 bulkhead kit weigh?\u003c\/strong\u003e The SeaStar HO7100 weighs 1 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HO7100?\u003c\/strong\u003e The HO7100 ships in packaging measuring 9 x 6 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the HO7100 is installed correctly?\u003c\/strong\u003e The snap-fit tabs on the split pigtail are designed to give a positive, noticeable feel when they are properly seated, which is the indicator that the HO7100 fitting is installed correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the HO7100 fittings match my boat's existing stainless trim?\u003c\/strong\u003e The stainless steel cover plates on the HO7100 are intended to blend in with a boat's existing stainless trim while providing a cosmetic upgrade over a plain bulkhead penetration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7100 a genuine SeaStar part?\u003c\/strong\u003e Yes, HO7100 is the SeaStar manufacturer part number for this stainless steel single hose bulkhead kit, sold as a matched pair.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989349839067,"sku":"TEL-HO7100","price":75.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7100__92586.1722507344.500.750.jpg?v=1785189118","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-ho7100-field-installed-bulkhead-kit-single-hose-pair-stainless-steel-hose-fitting","provider":"Good Vibes Marina","version":"1.0","type":"link"}