{"product_id":"seastar-ho7200-field-installed-bulkhead-kit-dual-hose-stainless-steel","title":"SeaStar HO7200 Dual Hose Bulkhead Fitting Kit, Field Installed, Stainless Steel","description":"\u003cp\u003eThe SeaStar HO7200 is a field-installed bulkhead fitting kit built for hydraulic steering hose installations that require a clean, sealed pass-through at a transom or bulkhead. The kit is configured for dual hose runs, allowing both hydraulic steering hoses to pass through a single bulkhead point with a secure, leak-resistant fit. Stainless steel construction provides corrosion resistance in the marine environment, standing up to saltwater exposure and repeated tightening without the rust or pitting that can affect lower-grade fittings.\u003c\/p\u003e\u003cp\u003eBecause this kit is field installed, it is intended to be fitted at the boat during the steering hose installation or upgrade, rather than pre-mounted at the factory. This makes it a practical option for rigging a new hydraulic steering system or replacing a worn or corroded bulkhead fitting on an existing setup. The dual-hose design keeps both steering lines organized and properly supported where they cross the bulkhead, reducing chafe and helping maintain a watertight seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HO7200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Field installed bulkhead fitting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Configuration:\u003c\/strong\u003e Dual hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Hydraulic steering hose bulkhead pass-through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar HO7200 used for?\u003c\/strong\u003e It is a bulkhead fitting kit that lets two hydraulic steering hoses pass through a boat's transom or bulkhead at a single, sealed point, part number HO7200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HO7200 a dual hose or single hose kit?\u003c\/strong\u003e The HO7200 is configured as a dual hose bulkhead kit, meaning it accommodates both hydraulic steering hoses through one fitting point rather than needing two separate single-hose fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar HO7200 made from?\u003c\/strong\u003e Stainless steel is the material used for the HO7200 bulkhead fitting kit, chosen for its resistance to corrosion in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 come pre-installed or do I fit it myself?\u003c\/strong\u003e The HO7200 is a field installed kit, meaning it is designed to be fitted during hose installation at the boat rather than arriving pre-mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar HO7200 weigh?\u003c\/strong\u003e The HO7200 bulkhead fitting kit weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HO7200 be used when upgrading an existing hydraulic steering system?\u003c\/strong\u003e Yes, because it is field installed, the HO7200 can be fitted when rigging a new hydraulic steering system or when replacing an existing bulkhead fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a bulkhead fitting kit instead of just running hoses through a plain hole?\u003c\/strong\u003e A bulkhead fitting kit like the HO7200 provides a sealed, supported pass-through for the hoses, reducing chafe at the bulkhead and helping keep the penetration watertight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar HO7200 suitable for saltwater use?\u003c\/strong\u003e The HO7200 is made of stainless steel, which is suited to withstand saltwater exposure without the rust or pitting that can affect lower-grade metal fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HO7200 kit include fittings for both hoses in one unit?\u003c\/strong\u003e Yes, the dual hose design of the HO7200 is built to handle both hydraulic steering hoses through a single bulkhead fitting kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of steering part is the HO7200?\u003c\/strong\u003e The HO7200 is a steering parts and accessories item, specifically a bulkhead fitting kit for hydraulic steering hose runs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989350101211,"sku":"TEL-HO7200","price":69.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/HO7200__83464.1722352750.500.750.jpg?v=1785329140","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-ho7200-field-installed-bulkhead-kit-dual-hose-stainless-steel","provider":"Good Vibes Marina","version":"1.0","type":"link"}