{"product_id":"seastar-ht5095-nylon-tube-3-8-x-50-for-hydraulic-steering-systems","title":"SeaStar Nylon Tube HT5095, 50 ft x 3\/8 in Hydraulic Steering Tubing","description":"\u003cp\u003eThe SeaStar Nylon Tube HT5095 is a 50 foot length of 3\/8 inch nylon tubing built for hydraulic steering line installation and replacement aboard boats using SeaStar hydraulic steering systems. Supplied as a continuous coil rather than a pre-cut kit, this tubing lets installers and repair techs cut runs to the exact length needed for a given helm-to-cylinder routing, making it a practical choice for custom installs, longer runs, or replacing sections of worn or damaged existing line.\u003c\/p\u003e\u003cp\u003eThe tube carries a polished nylon exterior, giving it a clean finished appearance where routing is visible and helping it resist the abrasion and UV exposure typical of a marine engine compartment or bilge area. Nylon hydraulic tubing of this type is valued for its rigidity, chemical resistance to hydraulic steering fluid, and consistent bore diameter, which helps maintain steering feel and system pressure over the length of the run.\u003c\/p\u003e\u003cp\u003eAt 3\/8 inch diameter, the HT5095 matches the tubing size used throughout SeaStar hydraulic steering plumbing, making it suitable for extending, repairing, or completely re-running a steering hydraulic circuit. The 50 foot length is enough material for most single- or dual-station steering installations with material to spare for fitting and routing adjustments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17.25 x 17 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806659\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal 3\/8 inch hydraulic steering tubing for use in SeaStar hydraulic steering system plumbing; suitable for cutting to length for a specific boat's steering line routing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5095 nylon tube?\u003c\/strong\u003e The HT5095 is 3\/8 inch diameter nylon tubing supplied in a 50 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 sold as a finished hose or as bulk tubing?\u003c\/strong\u003e It is supplied as a continuous 50 foot coil of nylon tubing, not a pre-cut hose with fittings attached, so it can be cut to the exact length needed for a steering line run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5095 tube made of?\u003c\/strong\u003e The SeaStar HT5095 is made of nylon with a polished exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5095 weigh?\u003c\/strong\u003e The SeaStar HT5095 50 foot tube weighs 2.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the HT5095?\u003c\/strong\u003e The HT5095 ships in a package measuring 17.25 x 17 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5095 tubing be used for a hydraulic steering system?\u003c\/strong\u003e Yes, the HT5095 is 3\/8 inch nylon tubing intended for hydraulic steering line installation and replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut the HT5095 tube to length myself?\u003c\/strong\u003e Yes, since the HT5095 is supplied as a 50 foot coil, it needs to be cut to the length required for your specific steering line routing during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5095 tube resistant to UV and abrasion?\u003c\/strong\u003e The polished nylon construction of the HT5095 is suited to the abrasion and exposure typical of marine steering line routing in engine compartments and bilge areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar HT5095?\u003c\/strong\u003e The SeaStar HT5095 nylon tube has UPC 731957806659.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5095 come with any fittings included?\u003c\/strong\u003e The HT5095 is bulk nylon tubing; fittings are not included as part of this tube.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351182555,"sku":"TEL-HT5095","price":137.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/513a_CGF_2L.jpg?v=1784477331","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-ht5095-nylon-tube-3-8-x-50-for-hydraulic-steering-systems","provider":"Good Vibes Marina","version":"1.0","type":"link"}