{"product_id":"seastar-ht5100-nylon-tubing-3-8-x-100-for-hydraulic-steering-systems","title":"SeaStar Nylon Steering Tube 3\/8 Inch, 100 Foot Length - HT5100","description":"\u003cp\u003eThe SeaStar HT5100 is a 100 foot continuous length of nylon tubing used for hydraulic steering line installations. Supplied as one unbroken 100 foot (30.4 meter) roll, it lets installers run long steering lines without field splices or extra fittings, which keeps the hydraulic circuit cleaner and reduces potential leak points along the run. The tube has a 3\/8 inch outside diameter and a nominal wall thickness of 0.375 inches, sized for use with SeaStar hydraulic steering system tubing runs.\u003c\/p\u003e\u003cp\u003eConstructed from nylon, the tubing is built to hold up to the routing, bending, and clamping involved in a typical helm-to-cylinder steering installation. Because it ships as a single continuous length rather than pre-cut sections, it is well suited to boats needing a longer or custom-length run, or for shops that cut tubing to length for multiple installations. This is genuine SeaStar tubing, sold under the SeaStar brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HT5100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.38 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Length:\u003c\/strong\u003e 100 feet (30.4 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957806673\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SeaStar HT5100 steering tube?\u003c\/strong\u003e The HT5100 has a 3\/8 inch outside diameter with a nominal wall thickness of 0.375 inches, and is sold as one 100 foot (30.4 meter) length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each HT5100 tube?\u003c\/strong\u003e Each HT5100 is a single continuous 100 foot (30.4 meter) length of nylon tubing, not a set of pre-cut sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the HT5100 tubing made from?\u003c\/strong\u003e SeaStar HT5100 tubing is made from nylon, chosen for its resistance to the bending and clamping involved in hydraulic steering line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 genuine SeaStar tubing?\u003c\/strong\u003e Yes, the HT5100 is genuine SeaStar-brand nylon steering tubing, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the HT5100 tube used for?\u003c\/strong\u003e The HT5100 is used to run hydraulic steering lines between the helm and steering cylinder, with the 100 foot length allowing longer or custom-length installations without splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the HT5100 tube weigh?\u003c\/strong\u003e The 100 foot roll of SeaStar HT5100 nylon tubing weighs 4.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the HT5100 come pre-cut or as a full roll?\u003c\/strong\u003e It ships as one continuous 100 foot roll of tubing rather than pre-cut lengths, so installers can cut it to the exact length needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the HT5100 be cut to a shorter length for installation?\u003c\/strong\u003e Yes, since the HT5100 is supplied as a single 100 foot length of nylon tubing, it can be cut down to the specific run length required for the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the HT5100 nylon tube?\u003c\/strong\u003e The outside diameter of the SeaStar HT5100 is 0.38 inches, commonly referred to as 3\/8 inch tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the HT5100 tubing suitable for use with other tubing sizes in the same steering run?\u003c\/strong\u003e The HT5100 is specifically 3\/8 inch outside diameter nylon tubing; it should be matched with fittings and components sized for 3\/8 inch tubing.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989351280859,"sku":"TEL-HT5100","price":274.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41v0cHZcSJL.jpg?v=1784477337","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-ht5100-nylon-tubing-3-8-x-100-for-hydraulic-steering-systems","provider":"Good Vibes Marina","version":"1.0","type":"link"}