{"product_id":"seastar-tfxtreme-ccx17910-10ft-control-cable-mercury-600a-style-replacement-for-mercury-mercruiser-mariner-force","title":"SeaStar CCX17910 XTREME Control Cable, 10 Feet, for Mercury, MerCruiser, Mariner and Force Engines with Mercury Controls","description":"\u003cp\u003eThe SeaStar CCX17910 is a 10-foot XTREME control cable engineered as a drop-in replacement for the Mercury 600A style control cable used on Mercury, MerCruiser, Mariner, and most Force outboard and sterndrive engines equipped with Mercury controls. It uses the existing connection components at both the engine and control head, so installation follows the same routing and hookup as the original cable. The cable is built around SeaStar's XTREME splined, coated core element, which uses ridges on the core to keep a close fit with the inner liner, giving smoother movement and less lost motion than a standard control cable. This construction allows a 4-inch minimum bend radius, compared to an 8-inch minimum bend radius on standard cables, making it well suited to tight engine rooms, performance and bass boats, and complex or long cable runs.\u003c\/p\u003e\u003cp\u003eThe cable is protected by a 0.34-inch super tough HDPE jacket that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. Inside, 0.033-inch oil tempered lay wires provide strength and consistent performance, while stainless steel terminals and brass fittings add corrosion protection at the connection points. The core is lubricated for life at the factory, so no additional greasing is required at installation. It applies to Mariner\/Mercury\/MerCruiser engines (1965-date) with Mercury controls, Force engines (1993-date) with Mercury controls, and SeaStar Osprey and SL-3 Series controls paired with Mercury, MerCruiser, Mariner, and most Force engines. Confirm the correct cable length for your application before ordering, since control cables are not adjustable after the fact.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Control Cable Assy., Merc TFXtreme 10 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Proprietary marine engine control connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male-to-female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pins:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 600 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Mercury, MerCruiser, Mariner, Force, BRP, OMC, Volvo engine control heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e XTREME technology, splined coated core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e 0.34-inch super tough HDPE jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e 0.033-inch oil tempered lay wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel terminals with brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards Met:\u003c\/strong\u003e ISO, NMMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272173\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMariner\/Mercury\/MerCruiser engines (1965-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce engines (1993-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll Mariner engines with Mercury\/Mariner controls, except pre-1993 40 HP and lower models\u003c\/li\u003e\n\u003cli\u003eAll 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003cli\u003eSeaStar Osprey and SL-3 Series controls to Mercury, MerCruiser, Mariner, and most Force engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 600A style control cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines and controls is the SeaStar CCX17910 compatible with?\u003c\/strong\u003e The CCX17910 fits Mariner, Mercury, and MerCruiser engines (1965-date) with Mercury controls, and Force engines (1993-date) with Mercury controls, along with SeaStar Osprey and SL-3 Series controls paired to Mercury, MerCruiser, Mariner, and most Force engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX17910 control cable?\u003c\/strong\u003e This cable measures 10 feet, matching the length code in the CCX17910 part number. Confirm the correct length for your boat before ordering, since control cables are not adjustable once installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable fit pre-1993 40 HP Mariner engines?\u003c\/strong\u003e No, the CCX17910 covers Mariner engines with Mercury\/Mariner controls except pre-1993, 40 HP and lower models, which use a different cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17910 a direct replacement for the factory cable?\u003c\/strong\u003e Yes, the CCX17910 is designed as a drop-in replacement for the Mercury 600A style control cable and uses the existing connection components at both the engine and control head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bend radius of the SeaStar XTREME control cable?\u003c\/strong\u003e The CCX17910 has a 4-inch minimum bend radius, half the 8-inch minimum bend radius of a standard control cable, which helps it route through tighter spaces and complex cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CCX17910 uses a 0.34-inch super tough HDPE jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used at the cable terminals?\u003c\/strong\u003e The CCX17910 has stainless steel terminals and brass fittings at its connection points, added for corrosion protection in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17910 need to be lubricated before installation?\u003c\/strong\u003e No, the CCX17910 is lubricated for life at the factory, so no additional greasing of the core is needed during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX17910 control cable weigh?\u003c\/strong\u003e The SeaStar CCX17910 weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CCX17910 control cable made?\u003c\/strong\u003e The CCX17910 XTREME control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins does the connector use and how much current can it handle?\u003c\/strong\u003e The CCX17910 uses a 2-pin male-to-female connector rated for up to 600 amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the XTREME cable and a standard control cable?\u003c\/strong\u003e The CCX17910 XTREME cable uses a splined, coated core for a closer fit and less lost motion, and allows a 4-inch minimum bend radius versus 8 inches for a standard cable, giving a smoother feel on long or complex cable runs.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989296296155,"sku":"TEL-CCX17910","price":54.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71liIdATPkL_a2c1fe9d-108d-4669-a997-3c790863c64a.jpg?v=1784475164","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-tfxtreme-ccx17910-10ft-control-cable-mercury-600a-style-replacement-for-mercury-mercruiser-mariner-force","provider":"Good Vibes Marina","version":"1.0","type":"link"}