{"product_id":"seastar-tfxtreme-ccx17920-20-ft-marine-control-cable-mercury-600a-style-replacement-mercury-force-mariner","title":"SeaStar CCX17920 Xtreme Control Cable, 20 Feet, Mercury\/MerCruiser\/Mariner\/Force","description":"\u003cp\u003eThe SeaStar CCX17920 is a 20-foot Xtreme control cable engineered as a drop-in replacement for Mercury 600A style control cables, using the existing connection components already on the boat. It is built for Mercury, MerCruiser, Mariner, and Force engines paired with Mercury, Quicksilver, or Mariner controls, and is well suited to performance and bass boats where complex or long cable runs demand a smoother, more responsive feel. The cable's Xtreme Technology gives it a 4-inch minimum bend radius, versus an 8-inch minimum bend radius on standard control cables, making it easier to route through tight engine bays and consoles.\u003c\/p\u003e\u003cp\u003eConstruction features a 0.34-inch super tough HDPE jacket that resists abrasion and stands up to UV, salt water, chemicals, gasoline, and oil, along with 0.033-inch oil tempered lay wires for strength and performance. A patented splined core provides a close fit with the cable's inner liner for easy movement and minimal lost motion, while stainless steel terminals and brass fittings add corrosion protection. The cable is lubricated for life at the factory and is made in the U.S.A. It exceeds engine manufacturer specifications and is type certified to ABYC, ISO\/IMCI, and NMMA requirements. Before ordering, confirm 20 feet is the correct length for the application by measuring the existing cable run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17920\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Xtreme Control Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Thickness:\u003c\/strong\u003e 0.34 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Diameter:\u003c\/strong\u003e 0.033 inch (oil tempered lay wires)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ABYC, ISO\/IMCI, NMMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury, MerCruiser, and Mariner engines (1965-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce engines (1993-date) with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll Mariner engines with Mercury\/Mariner controls, except pre-1993 40 HP and lower models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eDirect replacement for Mercury 600A style control cables, using the boat's existing connection components.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CCX17920 control cable fit?\u003c\/strong\u003e The CCX17920 fits Mercury, MerCruiser, and Mariner engines from 1965-date with Mercury controls, Force engines from 1993-date with Force\/US Marine\/Mercury controls, and all Mariner engines with Mercury\/Mariner controls except pre-1993 40 HP and lower models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e This is the 20-foot version of the SeaStar Xtreme control cable, part number CCX17920. Measure the existing cable run before ordering to confirm 20 feet is the correct length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17920 a direct replacement for my current cable?\u003c\/strong\u003e Yes, the CCX17920 is a drop-in replacement for Mercury 600A style control cables and uses the boat's existing connection components, so no additional hardware is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bend radius of the SeaStar Xtreme cable?\u003c\/strong\u003e The CCX17920 has a 4-inch minimum bend radius, compared to an 8-inch minimum bend radius on standard control cables, which makes it easier to route through tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the cable jacket made from?\u003c\/strong\u003e A 0.34-inch super tough HDPE jacket covers the CCX17920, resisting abrasion and withstanding UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17920 come pre-lubricated?\u003c\/strong\u003e Yes, the cable is lubricated for life at the factory, so no additional lubrication is required during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals and fittings made of?\u003c\/strong\u003e The CCX17920 uses stainless steel terminals and brass fittings, which add corrosion protection for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable certified for marine use?\u003c\/strong\u003e The CCX17920 exceeds engine manufacturer specifications and is type certified to ABYC, ISO\/IMCI, and NMMA requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CCX17920 manufactured?\u003c\/strong\u003e This control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX17920 weigh?\u003c\/strong\u003e The SeaStar CCX17920 weighs 2.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CCX17920 fit a Force outboard?\u003c\/strong\u003e Yes, Force engines from 1993-date using Force\/US Marine\/Mercury controls are compatible with the CCX17920.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core wire specification does this cable use?\u003c\/strong\u003e The CCX17920 uses 0.033-inch oil tempered lay wires with a splined, coated core element for smooth, low-lost-motion operation.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989300523227,"sku":"TEL-CCX17920","price":66.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41qFZOgq8gL_1bc85c64-4205-4161-b1ee-c53eb502cab8.jpg?v=1784475306","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-tfxtreme-ccx17920-20-ft-marine-control-cable-mercury-600a-style-replacement-mercury-force-mariner","provider":"Good Vibes Marina","version":"1.0","type":"link"}