{"product_id":"seastar-xtreme-22-ft-control-cable-ccx63022-for-mercury-3600-type-and-630-mariner-10-32-threaded-control-end-mercury-engine-end","title":"SeaStar Xtreme Control Cable CCX63022, 22 Foot, Mercury 3600 Type Engine End, 10-32 Threaded Control End","description":"\u003cp\u003eThe SeaStar Xtreme Control Cable CCX63022 is a 22-foot marine control cable built for throttle and shift connections on Mercury engine applications, including foot throttle setups common on performance and bass boats. It features a 10-32 threaded terminal at the control end and a Mercury type engine end connection, and it does not require the CA27319 connection kit. The cable uses SeaStar's Xtreme Technology, built around a patented splined core: ridges on the core give a close fit with the cable's inner liner, allowing smooth movement with minimal lost motion. This construction gives the Xtreme cable a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius on standard control cables, making it well suited to complex or long cable runs.\u003c\/p\u003e\u003cp\u003eConstruction includes a 0.34 inch super tough HDPE jacket that resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, along with 0.033 inch oil tempered lay wires for strength and performance. The inner liner is a long wearing HDPE liner that is ultra smooth and lubed for life, and the core wires are stainless or nylon covered with moisture protective seals for added corrosion protection. The cable is black in color and is made in the U.S.A. It exceeds ABYC safety standards and is type certified to ISO\/IMCI and NMMA requirements, and it is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX63022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Xtreme control cable with splined core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl End Connection:\u003c\/strong\u003e 10-32 threaded terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine End Connection:\u003c\/strong\u003e Mercury 3600 type (Mercury style engine end)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Kit Requirement:\u003c\/strong\u003e CA27319 kit not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches (versus 8 inches for standard cables)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket:\u003c\/strong\u003e 0.34 inch super tough HDPE jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay Wires:\u003c\/strong\u003e 0.033 inch oil tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner:\u003c\/strong\u003e Long wearing HDPE liner, lubed for life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wires:\u003c\/strong\u003e Stainless or nylon covered with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Exceeds ABYC standards; type certified to ISO\/IMCI and NMMA requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury engines using controls that accept a cable with 10-32 threaded ends, with a Mercury style engine end connection\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the SeaStar CCX63022 control cable?\u003c\/strong\u003e The CCX63022 is a 22-foot Xtreme control cable, as indicated by the last two digits of its part number. Always verify the required length for your specific control-to-engine run before ordering, since the correct length depends on your boat's layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX63022 require the CA27319 connection kit?\u003c\/strong\u003e No. The CCX63022 has a 10-32 threaded terminal at the control end and a Mercury type engine end connection, and the CA27319 kit is not required for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat controls is this cable compatible with?\u003c\/strong\u003e This cable is designed for controls that accept a cable with 10-32 threaded ends, which includes most aftermarket controls as well as compatible Mercury controls, paired with a Mercury style engine end connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius of the CCX63022 Xtreme cable?\u003c\/strong\u003e The CCX63022 has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius for standard control cables, making it a better fit for tight or complex cable routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the Xtreme cable different from a standard control cable?\u003c\/strong\u003e SeaStar's Xtreme Technology uses a patented splined core, where ridges on the core create a close fit with the cable's inner liner for smoother movement with less lost motion, and this design gives the CCX63022 its tighter 4 inch minimum bend radius versus 8 inches on standard cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CCX63022 cable made of?\u003c\/strong\u003e It is built with a 0.34 inch super tough HDPE jacket, 0.033 inch oil tempered lay wires, a long wearing HDPE liner that is lubed for life, and stainless or nylon covered core wires with moisture protective seals for corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar CCX63022 suitable for foot throttle applications?\u003c\/strong\u003e Yes, this 22-foot Xtreme control cable is designed for foot throttle to engine connections on performance and bass boats and is suited to long or complex cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CCX63022 control cable?\u003c\/strong\u003e The CCX63022 control cable is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CCX63022 control cable made?\u003c\/strong\u003e The CCX63022 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers the CCX63022 control cable?\u003c\/strong\u003e SeaStar backs the CCX63022 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX63022 meet marine safety standards?\u003c\/strong\u003e Yes, the CCX63022 exceeds ABYC safety standards and is type certified to ISO\/IMCI and NMMA requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX63022 control cable weigh?\u003c\/strong\u003e The CCX63022 weighs 2.88 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989338403035,"sku":"TEL-CCX63022","price":115.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71pwrlHhxuL_fba6ec4a-7bc1-40d0-865a-11296073f2f3.jpg?v=1784476327","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-22-ft-control-cable-ccx63022-for-mercury-3600-type-and-630-mariner-10-32-threaded-control-end-mercury-engine-end","provider":"Good Vibes Marina","version":"1.0","type":"link"}