{"product_id":"seastar-xtreme-ccx17906-6-ft-marine-control-cable-mercury-600a-style-replacement-for-mercury-mercruiser-mariner-and-force-engines","title":"SeaStar Xtreme Control Cable CCX17906, 6 Feet, Mercury 600A Style Replacement for Mercury\/MerCruiser\/Mariner\/Force Engines with Mercury Controls","description":"\u003cp\u003eThe SeaStar Xtreme Control Cable CCX17906 is a 6-foot drop-in replacement engineered for the Mercury 600A style control cable, using the existing connection components on the boat so no modification is required at installation. It is built for Mercury, MerCruiser, Mariner (1965-date) and Force (1993-date) engines running Mercury controls, and fits all Mariner engines using Mercury\/Mariner controls except pre-1993, 40 HP and lower models.\u003c\/p\u003e\u003cp\u003eThis cable uses SeaStar's XTREME Technology with a patented splined core: ridges on the core give a close fit to the cable's inner liner for easy movement with minimal lost motion, and the design allows a 4-inch minimum bend radius versus an 8-inch minimum bend radius on standard control cables, making it well suited to complex or long cable runs, or simply a smoother feel at the helm. The cable core is built from 0.033-inch oil tempered lay wires for strength, wrapped in a 0.34-inch super tough HDPE jacket that resists abrasion, UV, salt water, chemicals, gasoline, and oil. Stainless steel terminals and brass fittings add corrosion protection, and the HDPE liner is lubed for life at the factory.\u003c\/p\u003e\u003cp\u003eMade in the U.S.A., the CCX17906 is lifetime lubricated and requires no field lubrication. Before ordering, verify this 6-foot length is correct for your cable run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Control Cable Assy., Merc TFXtreme 6'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e 0.34-inch super tough HDPE (high-density polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e 0.033-inch oil tempered lay wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e Mercury, MerCruiser, Mariner, Force, Quicksilver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272135\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury\/MerCruiser\/Mariner (1965-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce (1993-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll Mariner engines with Mercury\/Mariner controls, except pre-1993, 40 HP and lower models\u003c\/li\u003e\n\u003cli\u003eAll 1993-date Force (US Marine) with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 600A style control cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines and controls does the CCX17906 fit?\u003c\/strong\u003e The SeaStar CCX17906 fits Mercury, MerCruiser, and Mariner engines (1965-date) with Mercury controls, and Force engines (1993-date) with Mercury controls, plus 1993-date Force (US Marine) models with Force\/US Marine\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable fit all Mariner outboards?\u003c\/strong\u003e It fits all Mariner engines using Mercury\/Mariner controls, with one exception: pre-1993 Mariner models of 40 HP and lower are not covered by the CCX17906.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX17906 control cable?\u003c\/strong\u003e The CCX17906 is 6 feet long, as indicated by the '06' in its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this cable replace?\u003c\/strong\u003e The CCX17906 is a drop-in replacement for the Mercury 600A style control cable and uses the same existing connection components, so no modification is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bend radius of the SeaStar Xtreme cable?\u003c\/strong\u003e The CCX17906 has a 4-inch minimum bend radius, compared to an 8-inch minimum bend radius on standard control cables, which makes it a better fit for tight or long cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the CCX17906 made from?\u003c\/strong\u003e This SeaStar control cable uses a 0.34-inch super tough HDPE outer jacket, 0.033-inch oil tempered lay wires in the core, stainless steel terminals, and brass fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable need to be lubricated after installation?\u003c\/strong\u003e No, the CCX17906 is lubricated at the factory for life and its HDPE liner is ultra smooth and pre-lubed, so no additional lubrication is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX17906 weigh?\u003c\/strong\u003e The SeaStar CCX17906 weighs 1.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17906 resistant to weather and chemical exposure?\u003c\/strong\u003e Yes, its HDPE jacket resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, and the stainless steel terminals and brass fittings add corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX17906 manufactured?\u003c\/strong\u003e The SeaStar CCX17906 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 6 feet is the correct cable length for my boat?\u003c\/strong\u003e Measure your existing control cable run before ordering the CCX17906, since control cables must be ordered in the correct length for the application; the 6-foot version is one length in the CCX179XX series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat technology sets this cable apart from a standard control cable?\u003c\/strong\u003e The CCX17906 uses SeaStar's XTREME Technology with a patented splined core, where ridges on the core provide a close fit to the inner liner for smoother movement and minimal lost motion compared to standard cables.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989295214811,"sku":"TEL-CCX17906","price":51.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71liIdATPkL.jpg?v=1784475138","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx17906-6-ft-marine-control-cable-mercury-600a-style-replacement-for-mercury-mercruiser-mariner-and-force-engines","provider":"Good Vibes Marina","version":"1.0","type":"link"}